[PATCH v2] clk: sunxi: pll2: Fix clock running too fast
Maxime Ripard
maxime.ripard at free-electrons.com
Tue Dec 1 03:14:52 PST 2015
Contrary to what the datasheet says, the pre divider doesn't seem to be
incremented by one in the PLL2, but just uses the value from the register,
with 0 being a bypass.
This fixes the audio playing too fast.
Since we now have the same pre-divider flags, and the only difference with
the A10 is the post-divider offset, also remove the structure to just pass
the offset as an argument.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
drivers/clk/sunxi/clk-a10-pll2.c | 23 +++++------------------
1 file changed, 5 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
index 5484c31ec568..0ee1f363e4be 100644
--- a/drivers/clk/sunxi/clk-a10-pll2.c
+++ b/drivers/clk/sunxi/clk-a10-pll2.c
@@ -41,15 +41,10 @@
#define SUN4I_PLL2_OUTPUTS 4
-struct sun4i_pll2_data {
- u32 post_div_offset;
- u32 pre_div_flags;
-};
-
static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
static void __init sun4i_pll2_setup(struct device_node *node,
- struct sun4i_pll2_data *data)
+ int post_div_offset)
{
const char *clk_name = node->name, *parent;
struct clk **clks, *base_clk, *prediv_clk;
@@ -76,7 +71,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
parent, 0, reg,
SUN4I_PLL2_PRE_DIV_SHIFT,
SUN4I_PLL2_PRE_DIV_WIDTH,
- data->pre_div_flags,
+ CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&sun4i_a10_pll2_lock);
if (!prediv_clk) {
pr_err("Couldn't register the prediv clock\n");
@@ -127,7 +122,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
*/
val = readl(reg);
val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
- val |= (SUN4I_PLL2_POST_DIV_VALUE - data->post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
+ val |= (SUN4I_PLL2_POST_DIV_VALUE - post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
writel(val, reg);
of_property_read_string_index(node, "clock-output-names",
@@ -191,25 +186,17 @@ err_unmap:
iounmap(reg);
}
-static struct sun4i_pll2_data sun4i_a10_pll2_data = {
- .pre_div_flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
-};
-
static void __init sun4i_a10_pll2_setup(struct device_node *node)
{
- sun4i_pll2_setup(node, &sun4i_a10_pll2_data);
+ sun4i_pll2_setup(node, 0);
}
CLK_OF_DECLARE(sun4i_a10_pll2, "allwinner,sun4i-a10-pll2-clk",
sun4i_a10_pll2_setup);
-static struct sun4i_pll2_data sun5i_a13_pll2_data = {
- .post_div_offset = 1,
-};
-
static void __init sun5i_a13_pll2_setup(struct device_node *node)
{
- sun4i_pll2_setup(node, &sun5i_a13_pll2_data);
+ sun4i_pll2_setup(node, 1);
}
CLK_OF_DECLARE(sun5i_a13_pll2, "allwinner,sun5i-a13-pll2-clk",
--
2.6.3
More information about the linux-arm-kernel
mailing list