[PATCH v2 3/3] gpiolib: Add GPIO initialization
Markus Pargmann
mpa at pengutronix.de
Sun Aug 30 00:44:46 PDT 2015
This functions adds a way to initialize a GPIO without hogging it.
Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
Documentation/devicetree/bindings/gpio/gpio.txt | 29 +++++++------
drivers/gpio/gpiolib-of.c | 9 ++++
drivers/gpio/gpiolib.c | 55 ++++++++++++++++++++-----
drivers/gpio/gpiolib.h | 2 +
4 files changed, 73 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 5788d5cf1252..55d58983ba43 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -116,29 +116,34 @@ Every GPIO controller node must contain both an empty "gpio-controller"
property, and a #gpio-cells integer property, which indicates the number of
cells in a gpio-specifier.
-The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
-providing automatic GPIO request and configuration as part of the
-gpio-controller's driver probe function.
+The GPIO chip may contain GPIO definitions. These define properties for single
+GPIOs of this controller.
-Each GPIO hog definition is represented as a child node of the GPIO controller.
+GPIO hogging is a mechanism providing automatic GPIO request and configuration
+as part of the gpio-controller's driver probe function.
+
+GPIO initialization provides an automatic initialization to known save values.
+Instead of GPIO hogging the GPIO's value and direction can be modified by other
+users after it was initialized.
+
+Each GPIO definition is represented as a child node of the GPIO controller.
Required properties:
-- gpio-hog: A property specifying that this child node represent a GPIO hog.
- gpios: Store the GPIO information (id, flags, ...). Shall contain the
number of cells specified in its parent node (GPIO controller
node).
-Only one of the following properties scanned in the order shown below.
-This means that when multiple properties are present they will be searched
-in the order presented below and the first match is taken as the intended
-configuration.
+
+Optional properties:
+- line-name: The GPIO label name. If not present the node name is used.
+ Only one of gpio-hog and gpio-initval may be specified.
+- gpio-hog: A property specifying that this child node represent a GPIO hog.
+- gpio-initval: This GPIO should be initialized to the specified configuration.
+ Only one of input, output-low and output-high may be specified:
- input: A property specifying to set the GPIO direction as input.
- output-low A property specifying to set the GPIO direction as output with
the value low.
- output-high A property specifying to set the GPIO direction as output with
the value high.
-Optional properties:
-- line-name: The GPIO label name. If not present the node name is used.
-
Example of two SOC GPIO banks defined as gpio-controller nodes:
qe_pio_a: gpio-controller at 1400 {
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index f1fe5123da28..ee00c2c63f57 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -234,6 +234,15 @@ static void of_gpiochip_scan_gpios(struct gpio_chip *chip)
if (gpiod_hog(desc, lflags, dflags))
continue;
+ } else if (of_property_read_bool(np, "gpio-initval")) {
+ if (!dflags) {
+ dev_warn(chip->dev, "GPIO line %d (%s): no initialization state specified, bailing out\n",
+ desc_to_gpio(desc), np->name);
+ continue;
+ }
+
+ if (gpiod_initialize(desc, lflags, dflags))
+ continue;
}
}
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index f1559fa72c36..d7aa27a92e82 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2178,15 +2178,8 @@ struct gpio_desc *__must_check __gpiod_get_index_optional(struct device *dev,
}
EXPORT_SYMBOL_GPL(__gpiod_get_index_optional);
-/**
- * gpiod_hog - Hog the specified GPIO desc given the provided flags
- * @desc: gpio whose value will be assigned
- * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
- * of_get_gpio_hog()
- * @dflags: gpiod_flags - optional GPIO initialization flags
- */
-int gpiod_hog(struct gpio_desc *desc, unsigned long lflags,
- enum gpiod_flags dflags)
+static int _gpiod_initialize(struct gpio_desc *desc, unsigned long lflags,
+ enum gpiod_flags dflags)
{
int status;
const char *name = desc->name;
@@ -2202,11 +2195,31 @@ int gpiod_hog(struct gpio_desc *desc, unsigned long lflags,
status = gpiod_configure_flags(desc, name, lflags, dflags);
if (status < 0) {
pr_err("setup of hog GPIO %s (chip %s, offset %d) failed\n",
- name, gpiod_to_chip(desc)->label, gpio_chip_hwgpio(desc));
+ name, gpiod_to_chip(desc)->label,
+ gpio_chip_hwgpio(desc));
gpiochip_free_own_desc(desc);
return status;
}
+ return 0;
+}
+
+/**
+ * gpiod_hog - Hog the specified GPIO desc given the provided flags
+ * @desc: gpio whose value will be assigned
+ * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
+ * of_get_gpio_hog()
+ * @dflags: gpiod_flags - optional GPIO initialization flags
+ */
+int gpiod_hog(struct gpio_desc *desc, unsigned long lflags,
+ enum gpiod_flags dflags)
+{
+ int ret;
+
+ ret = _gpiod_initialize(desc, lflags, dflags);
+ if (ret)
+ return ret;
+
/* Mark GPIO as hogged so it can be identified and removed later */
set_bit(FLAG_IS_HOGGED, &desc->flags);
@@ -2236,6 +2249,28 @@ static void gpiochip_free_hogs(struct gpio_chip *chip)
}
/**
+ * gpiod_initialize - Initialize a GPIO with a given value
+ * @desc: gpio whose value will be assigned
+ * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
+ * of_get_gpio_hog()
+ * @dflags: gpiod_flags - optional GPIO initialization flags
+ *
+ * This is used to initialize GPIOs that were defined in DT
+ */
+int gpiod_initialize(struct gpio_desc *desc, unsigned long lflags,
+ enum gpiod_flags dflags)
+{
+ int ret;
+
+ ret = _gpiod_initialize(desc, lflags, dflags);
+ if (ret)
+ return ret;
+
+ __gpiod_free(desc);
+ return ret;
+}
+
+/**
* gpiod_get_array - obtain multiple GPIOs from a multi-index GPIO function
* @dev: GPIO consumer, can be NULL for system-global GPIOs
* @con_id: function within the GPIO consumer
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 6c2aeff59f86..b6dfa3526e3a 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -99,6 +99,8 @@ int gpiod_request(struct gpio_desc *desc, const char *label);
void gpiod_free(struct gpio_desc *desc);
int gpiod_hog(struct gpio_desc *desc, unsigned long lflags,
enum gpiod_flags dflags);
+int gpiod_initialize(struct gpio_desc *desc, unsigned long lflags,
+ enum gpiod_flags dflags);
/*
* Return the GPIO number of the passed descriptor relative to its chip
--
2.5.0
More information about the linux-arm-kernel
mailing list