[PATCH 1/5] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit

[Sonny Rao]

On Thu, Aug 27, 2015 at 6:28 AM, Shawn Lin <shawn.lin at rock-chips.com> wrote:
> 在 2015/8/27 20:57, Krzysztof Kozlowski 写道:
>>
>> 2015-08-27 17:48 GMT+09:00 Shawn Lin <shawn.lin at rock-chips.com>:
>>>
>>>
>>> This patch adds to support burst mode for dev-to-mem and
>>> mem-to-dev transmit.
>>>
>>> Signed-off-by: Boojin Kim <boojin.kim at samsung.com>
>>> Signed-off-by: Addy Ke <addy.ke at rock-chips.com>
>>> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
>>> cc: Heiko Stuebner <heiko at sntech.de>
>>> cc: Doug Anderson <dianders at chromium.org>
>>> cc: Olof Johansson <olofj at google.com>
>>> Reviewed-and-tested-by: Sonny Rao <sonnyrao at chromium.org>
>>
>>
>> For the entire patchset: I would prefer to see someone's
>> reviewed/tested tag in his response. Sending a version 1 of patchset
>> (regardless of Boojin Kim's work two years ago) with such tag could
>> mean anything. I cannot verify it easily (unless digging somewhere...
>> or asking people). You could add for example: Reviewed-by Santa Claus.
>> Should I sent a letter to him asking for confirmation? :)
>>
>
> :) yes, you are right. I should comply with the rule, even if the patchest
> had been reviewed or tested by someone on another tree.

Hi, yeah I reviewed on a different tree, so you shouldn't put that tag
here, thanks for removing it.
I can re-review if you'd like.

>
>
>> More seriously - reviewed-by is a statement (please look at
>> Documentation/SubmittingPatches) and you cannot force someone to make
>> that statement. He must make such statement on his own.
>>
>> That's all from my side since I don't feel skilled enough to review the
>> code.
>>
>> Best regards,
>> Krzysztof
>>
>>>
>>> ---
>>>
>>>   drivers/dma/pl330.c | 18 ++++++++++++------
>>>   1 file changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
>>> index ecab4ea0..0d544d2 100644
>>> --- a/drivers/dma/pl330.c
>>> +++ b/drivers/dma/pl330.c
>>> @@ -1141,10 +1141,13 @@ static inline int _ldst_devtomem(unsigned
>>> dry_run, u8 buf[],
>>>                  const struct _xfer_spec *pxs, int cyc)
>>>   {
>>>          int off = 0;
>>> +       enum pl330_cond cond;
>>> +
>>> +       cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
>>>
>>>          while (cyc--) {
>>> -               off += _emit_WFP(dry_run, &buf[off], SINGLE,
>>> pxs->desc->peri);
>>> -               off += _emit_LDP(dry_run, &buf[off], SINGLE,
>>> pxs->desc->peri);
>>> +               off += _emit_WFP(dry_run, &buf[off], cond,
>>> pxs->desc->peri);
>>> +               off += _emit_LDP(dry_run, &buf[off], cond,
>>> pxs->desc->peri);
>>>                  off += _emit_ST(dry_run, &buf[off], ALWAYS);
>>>                  off += _emit_FLUSHP(dry_run, &buf[off],
>>> pxs->desc->peri);
>>>          }
>>> @@ -1156,11 +1159,14 @@ static inline int _ldst_memtodev(unsigned
>>> dry_run, u8 buf[],
>>>                  const struct _xfer_spec *pxs, int cyc)
>>>   {
>>>          int off = 0;
>>> +       enum pl330_cond cond;
>>> +
>>> +       cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
>>>
>>>          while (cyc--) {
>>> -               off += _emit_WFP(dry_run, &buf[off], SINGLE,
>>> pxs->desc->peri);
>>> +               off += _emit_WFP(dry_run, &buf[off], cond,
>>> pxs->desc->peri);
>>>                  off += _emit_LD(dry_run, &buf[off], ALWAYS);
>>> -               off += _emit_STP(dry_run, &buf[off], SINGLE,
>>> pxs->desc->peri);
>>> +               off += _emit_STP(dry_run, &buf[off], cond,
>>> pxs->desc->peri);
>>>                  off += _emit_FLUSHP(dry_run, &buf[off],
>>> pxs->desc->peri);
>>>          }
>>>
>>> @@ -2557,7 +2563,7 @@ static struct dma_async_tx_descriptor
>>> *pl330_prep_dma_cyclic(
>>>
>>>                  desc->rqtype = direction;
>>>                  desc->rqcfg.brst_size = pch->burst_sz;
>>> -               desc->rqcfg.brst_len = 1;
>>> +               desc->rqcfg.brst_len = pch->burst_len;
>>>                  desc->bytes_requested = period_len;
>>>                  fill_px(&desc->px, dst, src, period_len);
>>>
>>> @@ -2702,7 +2708,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct
>>> scatterlist *sgl,
>>>                  }
>>>
>>>                  desc->rqcfg.brst_size = pch->burst_sz;
>>> -               desc->rqcfg.brst_len = 1;
>>> +               desc->rqcfg.brst_len = pch->burst_len;
>>>                  desc->rqtype = direction;
>>>                  desc->bytes_requested = sg_dma_len(sg);
>>>          }
>>> --
>>> 2.3.7
>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
>>> the body of a message to majordomo at vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>>
>>
>>
>
>
> --
> Best Regards
> Shawn Lin
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/