[PATCH v5 0/8] arm64, numa: Add numa support for arm64 platforms.
Ganapatrao Kulkarni
gpkulkarni at gmail.com
Fri Aug 28 07:59:05 PDT 2015
On Fri, Aug 28, 2015 at 8:01 PM, Matthias Brugger
<matthias.bgg at gmail.com> wrote:
>
>
> On 14/08/15 18:39, Ganapatrao Kulkarni wrote:
>>
>> v5:
>> - created base verion of numa.c which creates dummy numa without
>> using dt
>> on single socket platforms. Then added patches for dt support.
>> - Incorporated review comments from Hanjun Guo.
>>
>> v4:
>> done changes as per Arnd review comments.
>>
>> v3:
>> Added changes to support numa on arm64 based platforms.
>> Tested these patches on cavium's multinode(2 node topology) platform.
>> In this patchset, defined and implemented dt bindings for numa mapping
>> for core and memory using device node property arm,associativity.
>>
>> v2:
>> Defined and implemented numa map for memory, cores to node and
>> proximity distance matrix of nodes.
>>
>> v1:
>> Initial patchset to support numa on arm64 platforms.
>>
>> Note:
>> 1. This patchset is tested for numa with dt on
>> thunderx single socket and dual socket boards.
>> 2. Numa DT booting needs the dt memory nodes, which are deleted in
>> current efi-stub,
>> hence to try numa with dt, you need to rebase with ard's patchset.
>>
>> http://git.linaro.org/people/ard.biesheuvel/linux-arm.git/shortlog/refs/heads/arm64-uefi-early-fdt-handling
>>
>>
>> Ganapatrao Kulkarni (4):
>> arm64, numa: adding numa support for arm64 platforms.
>> Documentation: arm64/arm: dt bindings for numa.
>> arm64, numa: adding numa support for arm64 platforms.
>> arm64, dt, thunderx: Add initial dts for Cavium Thunder SoC in 2 Node
>> topology.
>>
>> Documentation/devicetree/bindings/arm/numa.txt | 212 +++++++
>> arch/arm64/Kconfig | 32 +
>> arch/arm64/boot/dts/cavium/Makefile | 2 +-
>> arch/arm64/boot/dts/cavium/thunder-88xx-2n.dts | 78 +++
>> arch/arm64/boot/dts/cavium/thunder-88xx-2n.dtsi | 790
>> ++++++++++++++++++++++++
>> arch/arm64/include/asm/mmzone.h | 32 +
>> arch/arm64/include/asm/numa.h | 49 ++
>> arch/arm64/kernel/Makefile | 1 +
>> arch/arm64/kernel/dt_numa.c | 316 ++++++++++
>> arch/arm64/kernel/setup.c | 9 +
>> arch/arm64/kernel/smp.c | 3 +
>> arch/arm64/mm/Makefile | 1 +
>> arch/arm64/mm/init.c | 34 +-
>> arch/arm64/mm/numa.c | 563 +++++++++++++++++
>> 14 files changed, 2115 insertions(+), 7 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/arm/numa.txt
>> create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx-2n.dts
>> create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx-2n.dtsi
>> create mode 100644 arch/arm64/include/asm/mmzone.h
>> create mode 100644 arch/arm64/include/asm/numa.h
>> create mode 100644 arch/arm64/kernel/dt_numa.c
>> create mode 100644 arch/arm64/mm/numa.c
>>
>
> On which version is this patch-set based?
4.2 -rc5
>
> Regards,
> Matthias
thanks
Ganapat
More information about the linux-arm-kernel
mailing list