[PATCH v1 1/3] ARM: dts: rockchip: add core rk3036 dts

Heiko Stuebner heiko at sntech.de
Fri Aug 28 01:59:32 PDT 2015


Hi,

Am Freitag, 28. August 2015, 13:46:46 schrieb Xing Zheng:
> Initial release for rk3036, node definitions rk3036 sdk board.
> 
> Signed-off-by: Xing Zheng <zhengxing at rock-chips.com>
> ---
> 
> Changes in v1: None
> 
>  arch/arm/boot/dts/Makefile       |    1 +
>  arch/arm/boot/dts/rk3036-sdk.dts |  362
> ++++++++++++++++++++++++++++++++++++++ 2 files changed, 363 insertions(+)

as Eddie already said, please split into two files ... just look at the other 
Rockchip socs for inspiration :-)


>  create mode 100644 arch/arm/boot/dts/rk3036-sdk.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6d7cec1..7014a3b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>  	rk3066a-bqcurie2.dtb \
>  	rk3066a-marsboard.dtb \
>  	rk3066a-rayeager.dtb \
> +	rk3036-sdk.dtb \
>  	rk3188-radxarock.dtb \
>  	rk3288-evb-act8846.dtb \
>  	rk3288-evb-rk808.dtb \
> diff --git a/arch/arm/boot/dts/rk3036-sdk.dts
> b/arch/arm/boot/dts/rk3036-sdk.dts new file mode 100644
> index 0000000..0149c9a
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3036-sdk.dts
> @@ -0,0 +1,362 @@
> +/*
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/clock/rk3036-cru.h>
> +#include "skeleton.dtsi"
> +
> +/ {
> +	compatible = "rockchip,rk3036";
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		serial2 = &uart2;
> +	};
> +
> +	memory {
> +		reg = <0x60000000 0x40000000>;

missing
	device_type = "memory";


> +	};
> +
> +        arm-pmu {
> +                compatible = "arm,cortex-a7-pmu";
> +                interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
> +                             <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;

missing interrupt-affinity to map irq->cpu_core ?


> +        };
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		//enable-method = "rockchip,rk3066-smp";

please don't leave commented code around


> +
> +		cpu at f00 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0xf00>;
> +			operating-points = <
> +				/* KHz    uV */
> +				 816000 1000000
> +			>;
> +			#cooling-cells = <2>; /* min followed by max */
> +			clock-latency = <40000>;
> +			clocks = <&cru ARMCLK>;
> +			resets = <&cru SRST_CORE0>;
> +		};
> +		cpu at f01 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0xf01>;
> +			resets = <&cru SRST_CORE1>;
> +		};
> +	};
> +
> +	amba {
> +		compatible = "arm,amba-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +                pdma: pdma at 20078000 {
> +                        compatible = "arm,pl330", "arm,primecell";
> +                        reg = <0x20078000 0x4000>;
> +                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> +                                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> +                        #dma-cells = <1>;
> +                        clocks = <&cru ACLK_DMAC2>;
> +                        clock-names = "apb_pclk";
> +                };

indentation of the dma controller looks wrong


> +	};
> +
> +	xin24m: oscillator {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xin24m";
> +		#clock-cells = <0>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		arm,cpu-registers-not-fw-configured;
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_HIGH)>;

please provide all 4 irqs (secure, non-secure, virtual and hypervisor)


> +		clock-frequency = <24000000>;
> +		always-on;
> +	};
> +
> +	cru: clock-controller at 20000000 {
> +		compatible = "rockchip,rk3036-cru";
> +		reg = <0x20000000 0x1000>;
> +		rockchip,grf = <&grf>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +		assigned-clocks = <&cru PLL_GPLL>;
> +		assigned-clock-rates = <594000000>;
> +	};
> +
> +	uart0: serial at 20060000 {
> +		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
> +		reg = <0x20060000 0x100>;
> +		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <24000000>;
> +		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
> +		clock-names = "baudclk", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> +	};
> +
> +	uart1: serial at 20064000 {
> +		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
> +		reg = <0x20064000 0x100>;
> +		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <24000000>;
> +		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> +		clock-names = "baudclk", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&uart1_xfer>;
> +	};
> +
> +	uart2: serial at 20068000 {
> +		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
> +		reg = <0x20068000 0x100>;
> +		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <24000000>;
> +		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> +		clock-names = "baudclk", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&uart2_xfer>;
> +	};
> +
> +	pwm0: pwm at 20050000 {
> +		compatible = "rockchip,rk2928-pwm";
> +		reg = <0x20050000 0x10>;
> +		#pwm-cells = <3>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pwm0_pin>;
> +		clocks = <&cru PCLK_PWM>;
> +		clock-names = "pwm";
> +		status = "disabled";
> +	};
> +
> +	pwm1: pwm at 20050010 {
> +		compatible = "rockchip,rk2928-pwm";
> +		reg = <0x20050010 0x10>;
> +		#pwm-cells = <3>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pwm1_pin>;
> +		clocks = <&cru PCLK_PWM>;
> +		clock-names = "pwm";
> +		status = "disabled";
> +	};
> +
> +	pwm2: pwm at 20050020 {
> +		compatible = "rockchip,rk2928-pwm";
> +		reg = <0x20050020 0x10>;
> +		#pwm-cells = <3>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pwm2_pin>;
> +		clocks = <&cru PCLK_PWM>;
> +		clock-names = "pwm";
> +		status = "disabled";
> +	};
> +
> +	pwm3: pwm at 20050030 {
> +		compatible = "rockchip,rk2928-pwm";
> +		reg = <0x20050030 0x10>;
> +		#pwm-cells = <2>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pwm3_pin>;
> +		clocks = <&cru PCLK_PWM>;
> +		clock-names = "pwm";
> +		status = "disabled";
> +	};
> +
> +	sram at 10080000 {
> +		compatible = "mmio-sram";
> +		reg = <0x10080000 0x2000>;
> +		map-exec;
> +	};
> +
> +	gic: interrupt-controller at 10139000 {
> +		compatible = "arm,gic-400";
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		#address-cells = <0>;
> +
> +		reg = <0x10139000 0x1000>,
> +		      <0x1013a000 0x1000>;

please also provide the vgic registers and interrupt


> +	};
> +
> +	grf: syscon at 20008000 {
> +		compatible = "rockchip,rk3036-grf", "syscon";
> +		reg = <0x20008000 0x1000>;
> +	};
> +
> +	pinctrl: pinctrl {
> +		compatible = "rockchip,rk3036-pinctrl";
> +		rockchip,grf = <&grf>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		gpio0: gpio0 at 2007c000 {
> +			compatible = "rockchip,gpio-bank";
> +			reg =	<0x2007c000 0x100>;

please use a space after the "=" in "reg = <..."


> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cru PCLK_GPIO0>;
> +
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpio1: gpio1 at 20080000 {
> +			compatible = "rockchip,gpio-bank";
> +			reg = <0x20080000 0x100>;
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cru PCLK_GPIO1>;
> +
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpio2: gpio2 at 20084000 {
> +			compatible = "rockchip,gpio-bank";
> +			reg = <0x20084000 0x100>;
> +			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cru PCLK_GPIO2>;
> +
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		pcfg_pull_up: pcfg-pull-up {
> +			bias-pull-up;
> +		};
> +
> +		pcfg_pull_down: pcfg-pull-down {
> +			bias-pull-down;
> +		};
> +
> +		pcfg_pull_none: pcfg-pull-none {
> +			bias-disable;
> +		};
> +
> +		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
> +			bias-disable;
> +			drive-strength = <12>;
> +		};

The rk3036 iomux does not have a per-pin drive-strength setting it seems, so 
at the moment the pinctrl driver does not support changing the drive-strength, 
so this node should probably be dropped. It seems unused anyway.


> +
> +		uart0 {
> +			uart0_xfer: uart0-xfer {
> +				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
> +						<0 17 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +
> +			uart0_cts: uart0-cts {
> +				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +
> +			uart0_rts: uart0-rts {
> +				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +		};
> +
> +		uart1 {
> +			uart1_xfer: uart1-xfer {
> +				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
> +						<2 23 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +			/* no rts / cts for uart1 */
> +		};
> +
> +                uart2 {
> +                        uart2_xfer: uart2-xfer {
> +                                rockchip,pins = <1 18 RK_FUNC_2
> &pcfg_pull_none>, +                                                <1 19
> RK_FUNC_2 &pcfg_pull_none>; +                        };
> +                        /* no rts / cts for uart2 */
> +                };
> +
> +		pwm0 {
> +			pwm0_pin: pwm0-pin {
> +				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
> +			};
> +		};
> +
> +		pwm1 {
> +			pwm1_pin: pwm1-pin {
> +				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
> +			};
> +		};
> +
> +		pwm2 {
> +			pwm2_pin: pwm2-pin {
> +				rockchip,pins = <0 1 2 &pcfg_pull_none>;
> +			};
> +		};
> +
> +		pwm3 {
> +			pwm3_pin: pwm3-pin {
> +				rockchip,pins = <0 27 1 &pcfg_pull_none>;
> +			};
> +		};
> +	};
> +};




More information about the linux-arm-kernel mailing list