[PATCH] arm: tegra: dtsi whitespace clean-up for tegra20, tegra30 and tegra124
Marcel Ziswiler
marcel.ziswiler at toradex.com
Thu Aug 27 02:44:48 PDT 2015
There were a few cases of eight spaces being used instead of a tab
character plus one case of using two spaces after an equal sign instead
of just one which this patch fixes.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---
arch/arm/boot/dts/tegra124.dtsi | 2 +-
arch/arm/boot/dts/tegra20.dtsi | 4 ++--
arch/arm/boot/dts/tegra30.dtsi | 10 +++++-----
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 1e204a6..a5c878e 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -636,7 +636,7 @@
reg = <0x0 0x70030000 0x0 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_HDA>,
- <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+ <&tegra_car TEGRA124_CLK_HDA2HDMI>,
<&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index e058709..0a8d1a6 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -601,8 +601,8 @@
<&tegra_car TEGRA20_CLK_PLL_E>;
clock-names = "pex", "afi", "pll_e";
resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
+ <&tegra_car 72>,
+ <&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index fe04fb5..38e1e27 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -42,8 +42,8 @@
<&tegra_car TEGRA30_CLK_CML0>;
clock-names = "pex", "afi", "pll_e", "cml";
resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
+ <&tegra_car 72>,
+ <&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
@@ -153,7 +153,7 @@
&tegra_car TEGRA30_CLK_GR3D2>;
clock-names = "3d", "3d2";
resets = <&tegra_car 24>,
- <&tegra_car 98>;
+ <&tegra_car 98>;
reset-names = "3d", "3d2";
};
@@ -455,7 +455,7 @@
};
i2c at 7000c000 {
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -660,7 +660,7 @@
reg = <0x70030000 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_HDA>,
- <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+ <&tegra_car TEGRA30_CLK_HDA2HDMI>,
<&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
--
2.4.3
More information about the linux-arm-kernel
mailing list