[PATCH 2/5] ARM: NSP: add minimal Northstar Plus device tree
Jon Mason
jonmason at broadcom.com
Wed Aug 26 11:40:10 PDT 2015
On Tue, Aug 25, 2015 at 04:36:45PM -0700, Olof Johansson wrote:
> Hi,
>
> I'm not sure what the strategy behind your cc:ing on this patch set
> is. I only got a couple of them in my inbox, and this one wasn't one
> of them. :)
I sent them to the people listed as maintainers in get_maintainer.pl.
It didn't seem to include you in all of them, but I thought the
mailing list would be enough of a catch all. My apologies. I'll CC
everyone listed as a maintainer on all of the patches in the future.
>
> On Thu, Aug 20, 2015 at 10:46 AM, Jon Mason <jonmason at broadcom.com> wrote:
> > Add a very minimalistic set of Northstar Plus Device Tree files which
> > describes the SoC and the BCM958625 implementation. The perpherials
> > described are:
> >
> > ARM Cortex A9 CPU
> > 2 8250 UARTs
> > ARM GIC
> > PL310 L2 Cache
> > ARM A9 Global timer
> >
> > Signed-off-by: Jon Mason <jonmason at broadcom.com>
> > Signed-off-by: Kapil Hali <kapilh at broadcom.com>
> > Reviewed-by: Ray Jui <rjui at broadcom.com>
> > Reviewed-by: Scott Branden <sbranden at broadcom.com>
>
> Seeing reviewed-by already attached to a v1 of a patchset has limited
> value for someone on the outside.
>
> Reviewed-by is one of those tags that has a value that's mostly
> dependent on who it comes from. By not actually seeing the review and
> the feedback provided (and revisions made), less data is provided to
> tell if it's a valuable review or not.
>
> Also, if you're posting the code you should probably have your name
> below Kapil's, since you're the one signing off the origin of the
> code. See Documentation/SubmittingPatches.txt for details on what
> S-o-b actually means.
We worked on it together, but I'll be happy to reorder as you suggest.
>
>
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> > @@ -0,0 +1,105 @@
> > +/*
> > + * BSD LICENSE
> > + *
> > + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions
> > + * are met:
> > + *
> > + * * Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * * Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in
> > + * the documentation and/or other materials provided with the
> > + * distribution.
> > + * * Neither the name of Broadcom Corporation nor the names of its
> > + * contributors may be used to endorse or promote products derived
> > + * from this software without specific prior written permission.
> > + *
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
>
> I'm not sure we've seen BSD-only submissions before. I'll let DT
> maintainers (or Ian) speak up in case this would cause problems.
I was following the precedent in arch/arm/boot/dts/bcm-cygnus.dtsi.
If this is preferred to be GPL v2, then I will happily comply.
>
>
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +#include "skeleton.dtsi"
> > +
> > +/ {
> > + compatible = "brcm,nsp";
> > + model = "Broadcom Northstar Plus SoC";
> > + interrupt-parent = <&gic>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu at 0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a9";
> > + next-level-cache = <&L2>;
> > + reg = <0x0>;
> > + };
> > + };
> > +
> > + clocks {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + periph_clk: periph_clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <500000000>;
> > + };
> > + };
> > +
> > + uart0: serial at 18000300 {
> > + compatible = "ns16550a";
> > + reg = <0x18000300 0x100>;
> > + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> > + clock-frequency = <62499840>;
> > + status = "disabled";
> > + };
> > +
> > + uart1: serial at 18000400 {
> > + compatible = "ns16550a";
> > + reg = <0x18000400 0x100>;
> > + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> > + clock-frequency = <62499840>;
> > + status = "disabled";
> > + };
> > +
> > + gic: interrupt-controller at 19021000 {
> > + compatible = "arm,cortex-a9-gic";
> > + #interrupt-cells = <3>;
> > + #address-cells = <0>;
> > + interrupt-controller;
> > + reg = <0x19021000 0x1000>,
> > + <0x19020100 0x100>;
> > + };
> > +
> > + L2: l2-cache {
> > + compatible = "arm,pl310-cache";
> > + reg = <0x19022000 0x1000>;
> > + cache-unified;
> > + cache-level = <2>;
> > + };
> > +
> > + timer at 19020200 {
> > + compatible = "arm,cortex-a9-global-timer";
> > + reg = <0x19020200 0x100>;
> > + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&periph_clk>;
> > + };
> > +};
> > diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
> > new file mode 100644
> > index 0000000..a1bc151
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm958625k.dts
> > @@ -0,0 +1,57 @@
> > +/*
> > + * BSD LICENSE
> > + *
> > + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions
> > + * are met:
> > + *
> > + * * Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * * Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in
> > + * the documentation and/or other materials provided with the
> > + * distribution.
> > + * * Neither the name of Broadcom Corporation nor the names of its
> > + * contributors may be used to endorse or promote products derived
> > + * from this software without specific prior written permission.
> > + *
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "bcm-nsp.dtsi"
> > +
> > +/ {
> > + model = "NorthStar Plus SVK (BCM958625K)";
> > + compatible = "brcm,bcm58625", "brcm,nsp";
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
>
> No way to mount a root filesystem yet? How much work remains for that
> to be possible, and what's the plan for that?
It mounts rootfs. I am adding the rootfs to the kernel and device
tree blob via the u-boot mkimage command. It boots all the way to
shell without issue.
>
> > +
> > + uart0: serial at 18000300 {
> > + status = "okay";
> > + };
> > +
> > + uart1: serial at 18000400 {
> > + status = "okay";
> > + };
>
> I recommend using labels here instead so you don't have to mirror the
> DT layout to get the updated property right.
Agreed.
Thanks,
Jon
>
> I.e.
>
> &uart1 {
> status = "okay";
> };
>
>
>
> -Olof
More information about the linux-arm-kernel
mailing list