[PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node

[Kishon Vijay Abraham I]

Hi Tony,

On Thursday 30 July 2015 01:07 AM, Nishanth Menon wrote:
> On 07/29/2015 06:09 AM, Kishon Vijay Abraham I wrote:
>> For beagle x15, both the vdd and io lines are connected to the
>> same regulator (ldo1_reg). However vmmc_aux is populated to vdd_3v3.
>> Remove it.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
>> ---
>>  arch/arm/boot/dts/am57xx-beagle-x15.dts |    1 -
>>  1 file changed, 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
>> index a63bf78..d0db5c5 100644
>> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
>> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
>> @@ -579,7 +579,6 @@
>>  	pinctrl-0 = <&mmc1_pins_default>;
>>  
>>  	vmmc-supply = <&ldo1_reg>;
>> -	vmmc_aux-supply = <&vdd_3v3>;
>>  	pbias-supply = <&pbias_mmc_reg>;
>>  	bus-width = <4>;
>>  	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
>>
> Acked-by: Nishanth Menon <nm at ti.com>

Can you pick this one or you want me to resend it?

Thanks
Kishon