[PATCH-v2 1/5] mfd: 88pm800: Fix tabbing issue
Vaibhav Hiremath
vaibhav.hiremath at linaro.org
Mon Aug 24 11:56:29 PDT 2015
Driver had coding style issues where spaces were used instead
of tabs. This patch fixes them all.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath at linaro.org>
---
drivers/mfd/88pm800.c | 125 ++++++++++++++++++++++++--------------------------
1 file changed, 61 insertions(+), 64 deletions(-)
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index f104a32..c4e097d 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -30,55 +30,55 @@
#include <linux/of_device.h>
/* Interrupt Registers */
-#define PM800_INT_STATUS1 (0x05)
+#define PM800_INT_STATUS1 0x05
#define PM800_ONKEY_INT_STS1 (1 << 0)
#define PM800_EXTON_INT_STS1 (1 << 1)
-#define PM800_CHG_INT_STS1 (1 << 2)
-#define PM800_BAT_INT_STS1 (1 << 3)
-#define PM800_RTC_INT_STS1 (1 << 4)
+#define PM800_CHG_INT_STS1 (1 << 2)
+#define PM800_BAT_INT_STS1 (1 << 3)
+#define PM800_RTC_INT_STS1 (1 << 4)
#define PM800_CLASSD_OC_INT_STS1 (1 << 5)
-#define PM800_INT_STATUS2 (0x06)
+#define PM800_INT_STATUS2 0x06
#define PM800_VBAT_INT_STS2 (1 << 0)
#define PM800_VSYS_INT_STS2 (1 << 1)
#define PM800_VCHG_INT_STS2 (1 << 2)
#define PM800_TINT_INT_STS2 (1 << 3)
-#define PM800_GPADC0_INT_STS2 (1 << 4)
+#define PM800_GPADC0_INT_STS2 (1 << 4)
#define PM800_TBAT_INT_STS2 (1 << 5)
-#define PM800_GPADC2_INT_STS2 (1 << 6)
-#define PM800_GPADC3_INT_STS2 (1 << 7)
+#define PM800_GPADC2_INT_STS2 (1 << 6)
+#define PM800_GPADC3_INT_STS2 (1 << 7)
-#define PM800_INT_STATUS3 (0x07)
+#define PM800_INT_STATUS3 0x07
-#define PM800_INT_STATUS4 (0x08)
+#define PM800_INT_STATUS4 0x08
#define PM800_GPIO0_INT_STS4 (1 << 0)
#define PM800_GPIO1_INT_STS4 (1 << 1)
#define PM800_GPIO2_INT_STS4 (1 << 2)
#define PM800_GPIO3_INT_STS4 (1 << 3)
#define PM800_GPIO4_INT_STS4 (1 << 4)
-#define PM800_INT_ENA_1 (0x09)
+#define PM800_INT_ENA_1 0x09
#define PM800_ONKEY_INT_ENA1 (1 << 0)
#define PM800_EXTON_INT_ENA1 (1 << 1)
-#define PM800_CHG_INT_ENA1 (1 << 2)
-#define PM800_BAT_INT_ENA1 (1 << 3)
-#define PM800_RTC_INT_ENA1 (1 << 4)
+#define PM800_CHG_INT_ENA1 (1 << 2)
+#define PM800_BAT_INT_ENA1 (1 << 3)
+#define PM800_RTC_INT_ENA1 (1 << 4)
#define PM800_CLASSD_OC_INT_ENA1 (1 << 5)
-#define PM800_INT_ENA_2 (0x0A)
+#define PM800_INT_ENA_2 0x0A
#define PM800_VBAT_INT_ENA2 (1 << 0)
#define PM800_VSYS_INT_ENA2 (1 << 1)
#define PM800_VCHG_INT_ENA2 (1 << 2)
#define PM800_TINT_INT_ENA2 (1 << 3)
-#define PM800_INT_ENA_3 (0x0B)
+#define PM800_INT_ENA_3 0x0B
#define PM800_GPADC0_INT_ENA3 (1 << 0)
#define PM800_GPADC1_INT_ENA3 (1 << 1)
#define PM800_GPADC2_INT_ENA3 (1 << 2)
#define PM800_GPADC3_INT_ENA3 (1 << 3)
#define PM800_GPADC4_INT_ENA3 (1 << 4)
-#define PM800_INT_ENA_4 (0x0C)
+#define PM800_INT_ENA_4 0x0C
#define PM800_GPIO0_INT_ENA4 (1 << 0)
#define PM800_GPIO1_INT_ENA4 (1 << 1)
#define PM800_GPIO2_INT_ENA4 (1 << 2)
@@ -86,7 +86,7 @@
#define PM800_GPIO4_INT_ENA4 (1 << 4)
/* number of INT_ENA & INT_STATUS regs */
-#define PM800_INT_REG_NUM (4)
+#define PM800_INT_REG_NUM 4
/* Interrupt Number in 88PM800 */
enum {
@@ -114,7 +114,7 @@ enum {
};
/* PM800: generation identification number */
-#define PM800_CHIP_GEN_ID_NUM 0x3
+#define PM800_CHIP_GEN_ID_NUM 0x3
static const struct i2c_device_id pm80x_id_table[] = {
{"88PM800", 0},
@@ -129,47 +129,47 @@ static const struct of_device_id pm80x_of_match_table[] = {
static struct resource rtc_resources[] = {
{
- .name = "88pm80x-rtc",
- .start = PM800_IRQ_RTC,
- .end = PM800_IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
+ .name = "88pm80x-rtc",
+ .start = PM800_IRQ_RTC,
+ .end = PM800_IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct mfd_cell rtc_devs[] = {
{
- .name = "88pm80x-rtc",
- .of_compatible = "marvell,88pm80x-rtc",
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resources = &rtc_resources[0],
- .id = -1,
- },
+ .name = "88pm80x-rtc",
+ .of_compatible = "marvell,88pm80x-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ .id = -1,
+ },
};
static struct resource onkey_resources[] = {
{
- .name = "88pm80x-onkey",
- .start = PM800_IRQ_ONKEY,
- .end = PM800_IRQ_ONKEY,
- .flags = IORESOURCE_IRQ,
- },
+ .name = "88pm80x-onkey",
+ .start = PM800_IRQ_ONKEY,
+ .end = PM800_IRQ_ONKEY,
+ .flags = IORESOURCE_IRQ,
+ },
};
static const struct mfd_cell onkey_devs[] = {
{
- .name = "88pm80x-onkey",
- .of_compatible = "marvell,88pm80x-onkey",
- .num_resources = 1,
- .resources = &onkey_resources[0],
- .id = -1,
- },
+ .name = "88pm80x-onkey",
+ .of_compatible = "marvell,88pm80x-onkey",
+ .num_resources = 1,
+ .resources = &onkey_resources[0],
+ .id = -1,
+ },
};
static const struct mfd_cell regulator_devs[] = {
{
- .name = "88pm80x-regulator",
- .of_compatible = "marvell,88pm80x-regulator",
- .id = -1,
+ .name = "88pm80x-regulator",
+ .of_compatible = "marvell,88pm80x-regulator",
+ .id = -1,
},
};
@@ -323,8 +323,8 @@ out:
static int device_onkey_init(struct pm80x_chip *chip)
{
return mfd_add_devices(chip->dev, 0, &onkey_devs[0],
- ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
- NULL);
+ ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
+ NULL);
}
static int device_rtc_init(struct pm80x_chip *chip)
@@ -335,13 +335,13 @@ static int device_rtc_init(struct pm80x_chip *chip)
rtc_devs[0].pdata_size = pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0;
return mfd_add_devices(chip->dev, 0, &rtc_devs[0],
- ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
+ ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
}
static int device_regulator_init(struct pm80x_chip *chip)
{
return mfd_add_devices(chip->dev, 0, ®ulator_devs[0],
- ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
+ ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
}
static int device_irq_init_800(struct pm80x_chip *chip)
@@ -358,11 +358,10 @@ static int device_irq_init_800(struct pm80x_chip *chip)
/*
* irq_clr_on_wr defines the way of clearing interrupt by
- * read/write(0/1). It's read-clear by default.
+ * read/write(0/1). It's read-clear by default.
*/
- mask =
- PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
- PM800_WAKEUP2_INT_MASK;
+ mask = PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
+ PM800_WAKEUP2_INT_MASK;
irq_clr_mode = pdata->irq_clr_method == PM800_IRQ_CLR_ON_WRITE ?
PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
@@ -371,9 +370,8 @@ static int device_irq_init_800(struct pm80x_chip *chip)
if (ret < 0)
goto out;
- ret =
- regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
- chip->regmap_irq_chip, &chip->irq_data);
+ ret = regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
+ chip->regmap_irq_chip, &chip->irq_data);
out:
return ret;
@@ -409,18 +407,18 @@ static int pm800_pages_init(struct pm80x_chip *chip)
/* PM800 block power page */
subchip->power_page = i2c_new_dummy(client->adapter,
- subchip->power_page_addr);
+ subchip->power_page_addr);
if (subchip->power_page == NULL) {
ret = -ENODEV;
goto out;
}
subchip->regmap_power = devm_regmap_init_i2c(subchip->power_page,
- &pm80x_regmap_config);
+ &pm80x_regmap_config);
if (IS_ERR(subchip->regmap_power)) {
ret = PTR_ERR(subchip->regmap_power);
dev_err(chip->dev,
- "Failed to allocate regmap_power: %d\n", ret);
+ "Failed to allocate regmap_power: %d\n", ret);
goto out;
}
@@ -428,18 +426,18 @@ static int pm800_pages_init(struct pm80x_chip *chip)
/* PM800 block GPADC */
subchip->gpadc_page = i2c_new_dummy(client->adapter,
- subchip->gpadc_page_addr);
+ subchip->gpadc_page_addr);
if (subchip->gpadc_page == NULL) {
ret = -ENODEV;
goto out;
}
subchip->regmap_gpadc = devm_regmap_init_i2c(subchip->gpadc_page,
- &pm80x_regmap_config);
+ &pm80x_regmap_config);
if (IS_ERR(subchip->regmap_gpadc)) {
ret = PTR_ERR(subchip->regmap_gpadc);
dev_err(chip->dev,
- "Failed to allocate regmap_gpadc: %d\n", ret);
+ "Failed to allocate regmap_gpadc: %d\n", ret);
goto out;
}
i2c_set_clientdata(subchip->gpadc_page, chip);
@@ -620,8 +618,7 @@ static int pm800_probe(struct i2c_client *client,
chip = i2c_get_clientdata(client);
/* init subchip for PM800 */
- subchip =
- devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
+ subchip = devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
GFP_KERNEL);
if (!subchip) {
ret = -ENOMEM;
@@ -684,7 +681,7 @@ static struct i2c_driver pm800_driver = {
.owner = THIS_MODULE,
.pm = &pm80x_pm_ops,
.of_match_table = pm80x_of_match_table,
- },
+ },
.probe = pm800_probe,
.remove = pm800_remove,
.id_table = pm80x_id_table,
--
1.9.1
More information about the linux-arm-kernel
mailing list