[PATCH v4 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property

[Javier Martinez Canillas]

The regulator-compatible property from the regulator DT binding was
deprecated. But the max77686 DT binding doc still suggest to use it
instead of the regulator node name's which is the correct approach.

Signed-off-by: Javier Martinez Canillas <javier at osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Acked-by: Lee Jones <lee.jones at linaro.org>

---

Changes in v4:
- Add Lee Jones Acked-by tag to patch #1.

Changes in v3: None
Changes in v2:
- Add Krzysztof Kozlowski Reviewed-by tag to patch #1.

 Documentation/devicetree/bindings/mfd/max77686.txt | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 163bd81a4607..8221102d3fc2 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -26,7 +26,7 @@ Optional node:
 	};
 	refer Documentation/devicetree/bindings/regulator/regulator.txt
 
-  The regulator-compatible property of regulator should initialized with string
+  The regulator node's name should be initialized with a string
 to get matched with their hardware counterparts as follow:
 
 	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
@@ -55,16 +55,14 @@ Example:
 		reg = <0x09>;
 
 		voltage-regulators {
-			ldo11_reg {
-				regulator-compatible = "LDO11";
+			ldo11_reg: LDO11 {
 				regulator-name = "vdd_ldo11";
 				regulator-min-microvolt = <1900000>;
 				regulator-max-microvolt = <1900000>;
 				regulator-always-on;
 			};
 
-			buck1_reg {
-				regulator-compatible = "BUCK1";
+			buck1_reg: BUCK1 {
 				regulator-name = "vdd_mif";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt = <1300000>;
@@ -72,8 +70,7 @@ Example:
 				regulator-boot-on;
 			};
 
-			buck9_reg {
-				regulator-compatible = "BUCK9";
+			buck9_reg: BUCK9 {
 				regulator-name = "CAM_ISP_CORE_1.2V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1200000>;
-- 
2.4.3