[PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support

[Peter Ujfalusi]

Hi,

this series will enable analog audio (via onboard aic310x codec) for dra7-evm,
dra72-evm and am57xx-beagle-x15 boards.
In these board McASP3 is connected to the codec and for the McASP3 we needed to
have the DMA crossbar in place since the request lines are not mapped by
default.

Regars,
Peter
---
Peter Ujfalusi (11):
  ARM: OMAP: DRA7: hwmod: Add data for McASP3
  ARM: DTS: dra7: Add McASP3 node
  ARM: DTS: dra7-evm: Rename mmc2_3v3 supply to evm_3v3_sw
  ARM: DTS: dra7-evm: Add fixed regulator to be used by aic3106's DVDD
  ARM: DTS: dra7-evm: Enable pcf8575 (0x26 address) on i2c2 bus
  ARM: DTS: dra7-evm: Audio support
  ARM: DTS: dra72-evm: Add fixed regulator representing DVDD supply for
    aic3106
  ARM: DTS: dra72-evm: Add gpio hog for vin6_sel_s0 to select audio
  ARM: DTS: dra72-evm: Audio support
  ARM: DTS: am57xx-beagle-x15: Add fixed regulator for aic3104's DVDD
  ARM: DTS: am57xx-beagle-x15: Enable analog audio support

 arch/arm/boot/dts/am57xx-beagle-x15.dts   |  95 ++++++++++++++++++++
 arch/arm/boot/dts/dra7-evm.dts            | 142 +++++++++++++++++++++++++++++-
 arch/arm/boot/dts/dra7.dtsi               |  15 ++++
 arch/arm/boot/dts/dra72-evm.dts           | 138 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c |  41 +++++++++
 5 files changed, 428 insertions(+), 3 deletions(-)

-- 
2.5.0