[PATCH v1 3/3] arm64: dts: add Hi6220 mailbox node

[Leo Yan]

Hi Mark,

On Fri, Aug 21, 2015 at 07:40:59PM +0100, Mark Rutland wrote:
> On Wed, Aug 19, 2015 at 10:37:35AM +0100, Leo Yan wrote:
> > On Hi6220, below memory regions in DDR have specific purpose:
> > 
> >   0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
> >   0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
> >   0x06df,f000 - 0x06df,ffff: For mailbox message data.
> > 
> > This patch reserves these memory regions and add device node for
> > mailbox in dts.
> > 
> > Signed-off-by: Leo Yan <leo.yan at linaro.org>
> > ---
> >  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 20 +++++++++++++++++---
> >  arch/arm64/boot/dts/hisilicon/hi6220.dtsi      |  8 ++++++++
> >  2 files changed, 25 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > index e36a539..d5470d3 100644
> > --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > @@ -7,9 +7,6 @@
> >  
> >  /dts-v1/;
> >  
> > -/*Reserved 1MB memory for MCU*/
> > -/memreserve/ 0x05e00000 0x00100000;
> > -
> >  #include "hi6220.dtsi"
> >  
> >  / {
> > @@ -28,4 +25,21 @@
> >  		device_type = "memory";
> >  		reg = <0x0 0x0 0x0 0x40000000>;
> >  	};
> > +
> > +	reserved-memory {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		ranges;
> > +
> > +		mcu-buf at 05e00000 {
> > +			no-map;
> > +			reg = <0x0 0x05e00000 0x0 0x00100000>,	/* MCU firmware buffer */
> > +			      <0x0 0x0740f000 0x0 0x00001000>;	/* MCU firmware section */
> > +		};
> > +
> > +		mbox-buf at 06dff000 {
> > +			no-map;
> > +			reg = <0x0 0x06dff000 0x0 0x00001000>;	/* Mailbox message buf */
> > +		};
> > +	};
> 
> As far as I can see, it would be simpler to simply carve these out of the
> memory node.

Will modify for MCU firmware buffer and section.

> I don't see why you need reserved-memory here, given you're not referring to
> these regions by phandle anyway.

mbox-buf is used by below mailbox's node, but the start address has
been truncated with 4KB alignment; so should keep it, right?

Thanks,
Leo Yan

> >  };
> > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> > index 3f03380..9ff25bc 100644
> > --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> > +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> > @@ -167,5 +167,13 @@
> >  			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
> >  			clock-names = "uartclk", "apb_pclk";
> >  		};
> > +
> > +		mailbox: mailbox at f7510000 {
> > +			#mbox-cells = <1>;
> > +			compatible = "hisilicon,hi6220-mbox";
> > +			reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
> > +			      <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */
> > +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > +		};
> >  	};
> >  };
> > -- 
> > 1.9.1
> >