[PATCH v3 05/14] drm: bridge/analogix_dp: fix link_rate & lane_count bug

[Yakir Yang]

Hi Jingoo,

On 08/20/2015 02:22 AM, Jingoo Han wrote:
> On 2015. 8. 19., at PM 11:50, Yakir Yang <ykk at rock-chips.com> wrote:
>> link_rate and lane_count already configed in analogix_dp_set_link_train(),
> s/configed/configured
>
> Also, the commit name such as "fix ... bug" is not good.
> How about following?
>
> drm: bridge/analogix_dp: remove duplicate configuration of link rate and link count

Thanks, done, it's more readable.

- Yakir
> Best regards,
> Jingoo Han
>
>> so we don't need to config those repeatly after training finished, just
>> remove them out.
>>
>> Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
>> would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v3:
>> - Take Thierry Reding suggest, link_rate and lane_count shouldn't config to
>>   the DT property value directly, but we can take those as hardware limite.
>>   For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane,
>>   so DT property would like "link-rate = 0x0a" "lane-count = 4".
>>
>> Changes in v2: None
>>
>> drivers/gpu/drm/bridge/analogix_dp_core.c | 16 ++++++++--------
>> drivers/gpu/drm/bridge/analogix_dp_core.h |  9 +++++----
>> 2 files changed, 13 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix_dp_core.c
>> index 480cc13..1778e0a 100644
>> --- a/drivers/gpu/drm/bridge/analogix_dp_core.c
>> +++ b/drivers/gpu/drm/bridge/analogix_dp_core.c
>> @@ -635,6 +635,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
>>     /*
>>      * For DP rev.1.1, Maximum link rate of Main Link lanes
>>      * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
>> +     * For DP rev.1.2, Maximum link rate of Main Link lanes
>> +     * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
>>      */
>>     analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
>>     *bandwidth = data;
>> @@ -668,7 +670,8 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp,
>>     analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
>>
>>     if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
>> -        (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
>> +        (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
>> +        (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
>>         dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
>>             dp->link_train.link_rate);
>>         dp->link_train.link_rate = LINK_RATE_1_62GBPS;
>> @@ -901,8 +904,8 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>>         return;
>>     }
>>
>> -    ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
>> -                     dp->video_info->link_rate);
>> +    ret = analogix_dp_set_link_train(dp, dp->video_info->max_lane_count,
>> +                     dp->video_info->max_link_rate);
>>     if (ret) {
>>         dev_err(dp->dev, "unable to do link train\n");
>>         return;
>> @@ -912,9 +915,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>>     analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
>>     analogix_dp_enable_enhanced_mode(dp, 1);
>>
>> -    analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
>> -    analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
>> -
>>     analogix_dp_init_video(dp);
>>     ret = analogix_dp_config_video(dp);
>>     if (ret)
>> @@ -1198,13 +1198,13 @@ static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
>>     }
>>
>>     if (of_property_read_u32(dp_node, "analogix,link-rate",
>> -                 &dp_video_config->link_rate)) {
>> +                 &dp_video_config->max_link_rate)) {
>>         dev_err(dev, "failed to get link-rate\n");
>>         return ERR_PTR(-EINVAL);
>>     }
>>
>>     if (of_property_read_u32(dp_node, "analogix,lane-count",
>> -                 &dp_video_config->lane_count)) {
>> +                 &dp_video_config->max_lane_count)) {
>>         dev_err(dev, "failed to get lane-count\n");
>>         return ERR_PTR(-EINVAL);
>>     }
>> diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix_dp_core.h
>> index 2cefde9..941b34f 100644
>> --- a/drivers/gpu/drm/bridge/analogix_dp_core.h
>> +++ b/drivers/gpu/drm/bridge/analogix_dp_core.h
>> @@ -21,8 +21,9 @@
>> #define MAX_EQ_LOOP 5
>>
>> enum link_rate_type {
>> -    LINK_RATE_1_62GBPS = 0x06,
>> -    LINK_RATE_2_70GBPS = 0x0a
>> +    LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
>> +    LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
>> +    LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
>> };
>>
>> enum link_lane_count_type {
>> @@ -128,8 +129,8 @@ struct video_info {
>>     enum color_coefficient ycbcr_coeff;
>>     enum color_depth color_depth;
>>
>> -    enum link_rate_type link_rate;
>> -    enum link_lane_count_type lane_count;
>> +    enum link_rate_type       max_link_rate;
>> +    enum link_lane_count_type max_lane_count;
>> };
>>
>> struct link_train {
>> -- 
>> 1.9.1
>>
>>
>
>