[PATCH v3 0/14] Add Analogix Core Display Port Driver

Jingoo Han jingoohan1 at gmail.com
Wed Aug 19 23:55:13 PDT 2015


On 2015. 8. 20., at PM 3:23, Yakir Yang <ykk at rock-chips.com> wrote:
> 
> Hi Jingoo & Archit,
> 
> 
>> On 08/20/2015 12:54 AM, Jingoo Han wrote:
>>> On 2015. 8. 20., at PM 1:29, Archit Taneja <architt at codeaurora.org> wrote:
>>> Hi,
>>> 
>>>> On 08/19/2015 08:18 PM, Yakir Yang wrote:
>>>> 
>>>> Hi all,
>>>>    The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
>>>> share the same IP, so a lot of parts can be re-used. I split the common
>>>> code into bridge directory, then rk3288 and exynos only need to keep
>>>> some platform code. Cause I can't find the exact IP name of exynos dp
>>>> controller, so I decide to name dp core driver with "analogix" which I
>>>> find in rk3288 eDP TRM ;)
>>>> 
>>>> Beyond that, there are three light registers setting differents bewteen
>>>> exynos and rk3288.
>>>> 1. RK3288 have five special pll resigters which not indicata in exynos
>>>>    dp controller.
>>>> 2. The address of DP_PHY_PD(dp phy power manager register) are different
>>>>    between rk3288 and exynos.
>>>> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
>>>>    register).
>>>> 
>>>> I have verified this series on two kinds of rockchip platform board, one
>>>> is rk3288 sdk board which connect with a 2K display port monitor, the other
>>>> is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2",
>>>> both of them works rightlly.
>>>> 
>>>> I haven't verified the dp function on samsung platform, cause I haven't got
>>>> exynos boards. I can only ensure that there are no build error on samsung
>>>> platform, wish some samsung guys help to test. ;)
>>>> 
>>>> Thanks,
>>>> - Yakir
>>>> 
>>>> Changes in v3:
>>>> - Take Thierry Reding suggest, move exynos's video_timing code
>>>>   to analogix_dp-exynos platform driver, add get_modes method
>>>>   to struct analogix_dp_plat_data.
>>>> - Take Heiko suggest, rename some "samsung*" dts propery to "analogix*".
>>>> - Take Thierry Reding suggest, dynamic parse video timing info from
>>>>   struct drm_display_mode and struct drm_display_info.
>>>> - Take Thierry Reding suggest, link_rate and lane_count shouldn't config to
>>>>   the DT property value directly, but we can take those as hardware limite.
>>>>   For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane,
>>>>   so DT property would like "link-rate = 0x0a" "lane-count = 4".
>>>> - Take Heiko suggest, add devicetree binding documents.
>>>> - Take Thierry Reding suggest, remove sync pol & colorimetry properies
>>>>   from the new analogix dp driver devicetree binding.
>>>> - Update the exist exynos dtsi file with the latest DP DT properies.
>>>> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>>>>   dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>>>>   core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform
>>>>   driver which name to "pclk".
>>>> - Take Heiko suggest, add devicetree binding document.
>>>> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of remote
>>>>   point to get panel node.
>>>> - Add the new function point analogix_dp_platdata.get_modes init.
>>>> - Take Heiko suggest, add rockchip dp phy driver,
>>>>   collect the phy clocks and power control.
>>>> - Add "analogix,need-force-hpd" to indicate whether driver need foce
>>>>   hpd when hpd detect failed.
>>>> - move dp hpd detect to connector detect function.
>>>> - Add edid modes parse support
>>>> 
>>>> Changes in v2:
>>>> - Take Joe Preches advise, improved commit message more readable, and
>>>>   avoid using some uncommon style like bellow:
>>>>   -  retval = exynos_dp_read_bytes_from_i2c(...
>>>>                ...)
>>>>   +  retval =
>>>>   +  exynos_dp_read_bytes_from_i2c(......);
>>>> - Take Jingoo Han suggest, just remove my name from author list.
>>>> - Take Jingoo Han suggest, remove new copyright
>>>> - Fix compiled failed dut to analogix_dp_device misspell
>>>> - Take Heiko suggest, get panel node with remote-endpoint method,
>>>>   and create devicetree binding for driver.
>>>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>>>>   leave those clock to rockchip dp phy driver.
>>>> - Add GNU license v2 declared and samsung copyright
>>>> - Fix compile failed dut to phy_pd_addr variable misspell error
>>>> 
>>>> Yakir Yang (14):
>>>>   drm: exynos/dp: fix code style
>>>>   drm: exynos/dp: convert to drm bridge mode
>>>>   drm: bridge: analogix_dp: split exynos dp driver to bridge dir
>>>>   drm: bridge/analogix_dp: dynamic parse sync_pol & interlace &
>>>>     colorimetry
>>>>   drm: bridge/analogix_dp: fix link_rate & lane_count bug
>>>>   Documentation: drm/bridge: add document for analogix_dp
>>>>   drm: rockchip/dp: add rockchip platform dp driver
>>>>   phy: Add driver for rockchip Display Port PHY
>>>>   drm: bridge/analogix_dp: add platform device type support
>>>>   drm: bridge: analogix_dp: add some rk3288 special registers setting
>>>>   drm: bridge: analogix_dp: try force hpd after plug in lookup failed
>>>>   drm: bridge/analogix_dp: expand the delay time for hpd detect
>>>>   drm: bridge/analogix_dp: move hpd detect to connector detect function
>>>>   drm: bridge/analogix_dp: add edid modes parse in get_modes method
>>>> 
>>>>  .../devicetree/bindings/drm/bridge/analogix_dp.txt |   73 +
>>>>  .../devicetree/bindings/phy/rockchip-dp-phy.txt    |   26 +
>>>>  .../bindings/video/analogix_dp-rockchip.txt        |   83 ++
>>>>  .../devicetree/bindings/video/exynos_dp.txt        |   51 +-
>>>>  arch/arm/boot/dts/exynos5250-arndale.dts           |   10 +-
>>>>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |   10 +-
>>>>  arch/arm/boot/dts/exynos5250-snow.dts              |   12 +-
>>>>  arch/arm/boot/dts/exynos5250-spring.dts            |   12 +-
>>>>  arch/arm/boot/dts/exynos5420-peach-pit.dts         |   12 +-
>>>>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |   10 +-
>>>>  arch/arm/boot/dts/exynos5800-peach-pi.dts          |   12 +-
>>>>  drivers/gpu/drm/bridge/Kconfig                     |    5 +
>>>>  drivers/gpu/drm/bridge/Makefile                    |    1 +
>>>>  drivers/gpu/drm/bridge/analogix_dp_core.c          | 1382 +++++++++++++++++++
>>>>  drivers/gpu/drm/bridge/analogix_dp_core.h          |  286 ++++
>>>>  drivers/gpu/drm/bridge/analogix_dp_reg.c           | 1294 ++++++++++++++++++
>>>>  .../exynos_dp_reg.h => bridge/analogix_dp_reg.h}   |  270 ++--
>>>>  drivers/gpu/drm/exynos/Kconfig                     |    5 +-
>>>>  drivers/gpu/drm/exynos/Makefile                    |    2 +-
>>>>  drivers/gpu/drm/exynos/analogix_dp-exynos.c        |  347 +++++
>>>>  drivers/gpu/drm/exynos/exynos_dp_core.c            | 1416 --------------------
>>>>  drivers/gpu/drm/exynos/exynos_dp_core.h            |  282 ----
>>>>  drivers/gpu/drm/exynos/exynos_dp_reg.c             | 1263 -----------------
>>>>  drivers/gpu/drm/rockchip/Kconfig |    9 +
>>>>  drivers/gpu/drm/rockchip/Makefile                  |    1 +
>>>>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  390 ++++++
>>>>  drivers/phy/Kconfig                                |    7 +
>>>>  drivers/phy/Makefile                               |    1 +
>>>>  drivers/phy/phy-rockchip-dp.c                      |  185 +++
>>>>  include/drm/bridge/analogix_dp.h |   40 +
>>>>  30 files changed, 4325 insertions(+), 3172 deletions(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>>>>  create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
>>>>  create mode 100644 Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>>>>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.c
>>>>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.h
>>>>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_reg.c
>>> Minor comment: Since there are a few files required for the driver,
>>> could you create a separate folder within drivers/gpu/drm/bridge?
>> I agree on this opinion.
>> Thank you.
> 
> Thanks for your comment ;)
> 
> Yeah, bridge/ have been add four new files for this driver, it would be better to
> collect into a separate folder.
> 
> I'm wondering should I just name the folder with "analogix_dp/", or we can make
> it more common (like "analogix/")? (personally I do like the last one)

I prefer "analogix".

Best regards,
Jingoo Han

> Thanks,
> - Yakir
>> Best regards,
>> Jingoo Han
>> 
>>> Thanks,
>>> Archit
>>> 
>>> -- 
>>> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
>>> a Linux Foundation Collaborative Project
> 
> 



More information about the linux-arm-kernel mailing list