[PATCH 2/2] ARM: qcom: enable uart output by default on AP148

[Mathieu Olivari]

This change adds a new chosen node to boot using UART console on AP148

Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 55b2910..b08907a 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -14,6 +14,14 @@
 		};
 	};
 
+	alias {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		linux,stdout-path = "serial0:115200n8";
+	};
+
 	soc {
 		pinmux at 800000 {
 			i2c4_pins: i2c4_pinmux {
-- 
2.1.4