[PATCH 1/2] ARM: dts: rockchip: add veyron-jaq board
Heiko Stuebner
heiko at sntech.de
Tue Aug 18 12:19:05 PDT 2015
Hi Brian,
Am Dienstag, 18. August 2015, 11:44:14 schrieb Brian Norris:
> a.k.a. Haier Chromebook 11
>
> Signed-off-by: Brian Norris <briannorris at chromium.org>
> Cc: Alexandru M Stan <amstan at chromium.org>
> Cc: Douglas Anderson <dianders at chromium.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3288-veyron-jaq.dts | 176
> ++++++++++++++++++++++++++++++++ 2 files changed, 177 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3288-veyron-jaq.dts
missing binding documentation in
Documentation/devicetree/bindings/arm/rockchip.txt (needs new entry above
Jerry)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7805a6541a38..7a2c3c88ce9e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -493,6 +493,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3288-veyron-jerry.dtb \
> rk3288-veyron-minnie.dtb \
> rk3288-veyron-pinky.dtb \
> + rk3288-veyron-jaq.dtb \
> rk3288-veyron-speedy.dtb
please sort alphabetically (in this case somewhere above jerry)
> dtb-$(CONFIG_ARCH_S3C24XX) += \
> s3c2416-smdk2416.dtb
> diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> b/arch/arm/boot/dts/rk3288-veyron-jaq.dts new file mode 100644
> index 000000000000..ea6130156216
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> @@ -0,0 +1,176 @@
> +/*
> + * Google Veyron Jaq Rev 1+ board device tree source
> + *
> + * Copyright 2015 Google, Inc
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "rk3288-veyron-chromebook.dtsi"
> +#include "cros-ec-sbs.dtsi"
> +
> +/ {
> + model = "Google Jaq";
> + compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
> + "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
> + "google,veyron-jaq-rev1", "google,veyron-jaq",
> + "google,veyron", "rockchip,rk3288";
> +
> + panel_regulator: panel-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&lcd_enable_h>;
> + regulator-name = "panel_regulator";
> + vin-supply = <&vcc33_sys>;
> + };
> +
> + vcc18_lcd: vcc18-lcd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&avdd_1v8_disp_en>;
> + regulator-name = "vcc18_lcd";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc18_wl>;
> + };
> +
> + backlight_regulator: backlight-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_pwr_en>;
> + regulator-name = "backlight_regulator";
> + vin-supply = <&vcc33_sys>;
> + startup-delay-us = <15000>;
> + };
again, please alphabetically (backlight, panel, vcc*)
> +};
> +
> +&rk808 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
> + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
> + <&gpio7 15 GPIO_ACTIVE_HIGH>;
> +
> + regulators {
> + mic_vcc: LDO_REG2 {
> + regulator-name = "mic_vcc";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> + };
> +};
> +
> +&sdmmc {
> + disable-wp;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
> + &sdmmc_bus4>;
> +};
> +
> +&vcc_5v {
> + enable-active-high;
> + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&drv_5v>;
> +};
> +
> +&vcc50_hdmi {
> + enable-active-high;
> + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc50_hdmi_en>;
> +};
> +
> +&pinctrl {
> + backlight {
> + bl_pwr_en: bl_pwr_en {
> + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + buck-5v {
> + drv_5v: drv-5v {
> + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + edp {
> + edp_hpd: edp_hpd {
> + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
> + };
> + };
> +
> + hdmi {
> + vcc50_hdmi_en: vcc50-hdmi-en {
> + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + lcd {
> + lcd_enable_h: lcd-en {
> + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + avdd_1v8_disp_en: avdd-1v8-disp-en {
> + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + dvs_1: dvs-1 {
> + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + dvs_2: dvs-2 {
> + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +};
pinctrl can stay at the bottom. It may actually improve readability, if not
cluttering up the smaller other nodes above.
Thanks
Heiko
More information about the linux-arm-kernel
mailing list