[PATCH v2 18/21] mfd: htc-pasic3: Prepare driver for leds-pasic3
Petr Cvek
petr.cvek at tul.cz
Mon Aug 17 15:05:48 PDT 2015
Fix register definitions and prepare structures for new leds-pasic3
driver.
Signed-off-by: Petr Cvek <petr.cvek at tul.cz>
---
drivers/mfd/htc-pasic3.c | 54 ++++++++++++++++-----------
include/linux/mfd/htc-pasic3.h | 85 +++++++++++++++++++++++++++++++-----------
2 files changed, 97 insertions(+), 42 deletions(-)
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index e88d4f6..16e156d 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -3,6 +3,9 @@
*
* Copyright (C) 2006 Philipp Zabel <philipp.zabel at gmail.com>
*
+ * 2015: Added registers for LED and RESET, see htc-pasic3.h
+ * -- Petr Cvek
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
@@ -21,15 +24,10 @@
#include <linux/mfd/htc-pasic3.h>
#include <linux/slab.h>
-struct pasic3_data {
- void __iomem *mapping;
- unsigned int bus_shift;
-};
-
#define REG_ADDR 5
#define REG_DATA 6
-#define READ_MODE 0x80
+#define READ_MODE BIT(7)
/*
* write to a secondary register on the PASIC3
@@ -76,24 +74,36 @@ static struct mfd_cell led_cell __initdata = {
static int ds1wm_enable(struct platform_device *pdev)
{
struct device *dev = pdev->dev.parent;
- int c;
+ struct pasic3_data *asic = platform_get_drvdata(pdev);
+ unsigned long flags;
+ u8 c;
+
+ spin_lock_irqsave(&asic->lock, flags);
+
+ c = pasic3_read_register(dev, PASIC3_GPIO);
+ pasic3_write_register(dev, PASIC3_GPIO, c & ~DS1WM_NEN);
- c = pasic3_read_register(dev, 0x28);
- pasic3_write_register(dev, 0x28, c & 0x7f);
+ spin_unlock_irqrestore(&asic->lock, flags);
- dev_dbg(dev, "DS1WM OWM_EN low (active) %02x\n", c & 0x7f);
+ dev_dbg(dev, "DS1WM OWM_EN low (active) %02lx\n", c & ~DS1WM_NEN);
return 0;
}
static int ds1wm_disable(struct platform_device *pdev)
{
struct device *dev = pdev->dev.parent;
- int c;
+ struct pasic3_data *asic = platform_get_drvdata(pdev);
+ unsigned long flags;
+ u8 c;
+
+ spin_lock_irqsave(&asic->lock, flags);
+
+ c = pasic3_read_register(dev, PASIC3_GPIO);
+ pasic3_write_register(dev, PASIC3_GPIO, c | DS1WM_NEN);
- c = pasic3_read_register(dev, 0x28);
- pasic3_write_register(dev, 0x28, c | 0x80);
+ spin_unlock_irqrestore(&asic->lock, flags);
- dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02x\n", c | 0x80);
+ dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02lx\n", c | DS1WM_NEN);
return 0;
}
@@ -130,6 +140,7 @@ static int __init pasic3_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct pasic3_data *asic;
struct resource *r;
+ struct pasic3_leds_pdata *leds_pdata;
int ret;
int irq = 0;
@@ -162,6 +173,8 @@ static int __init pasic3_probe(struct platform_device *pdev)
/* calculate bus shift from mem resource */
asic->bus_shift = (resource_size(r) - 5) >> 3;
+ spin_lock_init(&asic->lock);
+
if (pdata && pdata->clock_rate) {
ds1wm_pdata.clock_rate = pdata->clock_rate;
/* the first 5 PASIC3 registers control the DS1WM */
@@ -172,13 +185,12 @@ static int __init pasic3_probe(struct platform_device *pdev)
dev_warn(dev, "failed to register DS1WM\n");
}
- if (pdata && pdata->led_pdata) {
- led_cell.platform_data = pdata->led_pdata;
- led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo);
- ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r,
- 0, NULL);
- if (ret < 0)
- dev_warn(dev, "failed to register LED device\n");
+ if (pdata && pdata->pasic3_leds) {
+ leds_pdata = dev_get_platdata(&pdata->pasic3_leds->dev);
+ if (leds_pdata) {
+ leds_pdata->mfd_dev = dev;
+ platform_device_register(pdata->pasic3_leds);
+ }
}
return 0;
diff --git a/include/linux/mfd/htc-pasic3.h b/include/linux/mfd/htc-pasic3.h
index 3d3ed67..91a27b6 100644
--- a/include/linux/mfd/htc-pasic3.h
+++ b/include/linux/mfd/htc-pasic3.h
@@ -2,6 +2,7 @@
* HTC PASIC3 driver - LEDs and DS1WM
*
* Copyright (c) 2007 Philipp Zabel <philipp.zabel at gmail.com>
+ * Copyright (c) 2015 Petr Cvek <petr.cvek at tul.cz>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
@@ -18,37 +19,79 @@
extern void pasic3_write_register(struct device *dev, u32 reg, u8 val);
extern u8 pasic3_read_register(struct device *dev, u32 reg);
-/*
- * mask for registers 0x20,0x21,0x22
- */
-#define PASIC3_MASK_LED0 0x04
-#define PASIC3_MASK_LED1 0x08
-#define PASIC3_MASK_LED2 0x40
+#define PASIC3_CH0_DELAY_ON 0x00
+#define PASIC3_CH0_DELAY_OFF 0x01
+#define PASIC3_CH1_DELAY_ON 0x02
+#define PASIC3_CH1_DELAY_OFF 0x03
+#define PASIC3_CH2_DELAY_ON 0x04
+#define PASIC3_CH2_DELAY_OFF 0x05
+#define PASIC3_DELAY_MASK 0x7f
+
+#define PASIC3_CH_CONTROL 0x06
+#define R06_CH0_EN BIT(0)
+#define R06_CH1_EN BIT(1)
+#define R06_CH2_EN BIT(2)
+#define R06_CH0_FORCE_ON BIT(3)
+#define R06_CH1_FORCE_ON BIT(4)
+#define R06_CH2_FORCE_ON BIT(5)
/*
- * bits in register 0x06
+ * pwm_ch0_out | force_on | (bit0 & bit1 & bit2)
+ * pwm_ch1_out | force_on | (bit0 & bit1 & bit2)
+ * pwm_ch2_out | force_on | (bit2?bit0:(bit0 & ! bit1))
*/
-#define PASIC3_BIT2_LED0 0x08
-#define PASIC3_BIT2_LED1 0x10
-#define PASIC3_BIT2_LED2 0x20
+
+#define PASIC3_MASK_A 0x20
+#define PASIC3_MASK_B 0x21
+#define PASIC3_MASK_C 0x22
+#define MASK_CH0 BIT(2)
+#define MASK_CH1 BIT(3)
+#define MASK_CH2 BIT(6)
+#define PASIC3_GPIO 0x28
+#define DS1WM_NEN BIT(7)
+#define PASIC3_SYS 0x2a
+
+/* NORMAL_RST, CAM_PWR_RST and UNKNOWN will autoclear, set STATUS */
+#define NORMAL_RST BIT(0)
+#define CAM_PWR_RST BIT(1)
+#define UNKNOWN BIT(2)
+#define STATUS_NORMAL_RST BIT(4)
+#define STATUS_CAM_PWR_RST BIT(5)
+#define STATUS_UNKNOWN BIT(6)
+
+/* FIXME/TODO reset sources */
+#define PASIC3_RST_EN 0x2c
+#define EN_NORMAL_RST 0x40
+#define EN_DOOR_RST 0x42
struct pasic3_led {
- struct led_classdev led;
- unsigned int hw_num;
- unsigned int bit2;
- unsigned int mask;
- struct pasic3_leds_machinfo *pdata;
+ char name[24];
+ char default_trigger[80];
+ int hw_num;
+ u8 bit_blink_en;
+ u8 bit_force_on;
+ u8 bit_mask;
+ u8 reg_delay_on;
+ u8 reg_delay_off;
};
-struct pasic3_leds_machinfo {
- unsigned int num_leds;
- unsigned int power_gpio;
+struct pasic3_leds_pdata {
struct pasic3_led *leds;
+ int num_leds;
+ int power_gpio;
+ int power_gpio_users;
+ struct device *mfd_dev;
};
-struct pasic3_platform_data {
- struct pasic3_leds_machinfo *led_pdata;
- unsigned int clock_rate;
+struct pasic3_data {
+ void __iomem *mapping;
+ unsigned int bus_shift;
+ spinlock_t lock;
};
+struct pasic3_platform_data {
+ unsigned int clock_rate;
+ struct pasic3_led *leds;
+ struct platform_device *pasic3_leds;
+};
#endif
--
1.7.12.1
More information about the linux-arm-kernel
mailing list