[PATCH 2/4] serial: xuartps: Do not handle overrun errors under IGNPAR option

[Anirudha Sarangi]

Hi,

> -----Original Message-----
> From: Peter Hurley [mailto:peter at hurleysoftware.com]
> Sent: Monday, August 17, 2015 9:20 PM
> To: Michal Simek
> Cc: linux-kernel at vger.kernel.org; monstr at monstr.eu; Anirudha Sarangi; Soren
> Brinkmann; Jiri Slaby; linux-serial at vger.kernel.org; Greg Kroah-Hartman; linux-
> arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 2/4] serial: xuartps: Do not handle overrun errors under
> IGNPAR option
>
> On 08/17/2015 03:22 AM, Michal Simek wrote:
> > From: Anirudha Sarangi <anirudha.sarangi at xilinx.com>
> >
> > The existing implementation includes overrun errors under IGNPAR
> > option. This patch fixes it by including only parity and framing error
> > under IGNPAR option.
>
> The convention adopted by Linux serial drivers is to ignore overrun errors if both
> IGNPAR and IGNBRK are set.
>
I just followed the set_termios documentation, which says that IGNPAR is for parity and framing.
The current controller does not support break detection reliably.
That is probably why we don’t have IGNBRK.

Regards
Anirudha

> Regards,
> Peter Hurley
>
> > Signed-off-by: Anirudha Sarangi <anirudh at xilinx.com>
> > Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> > ---
> >
> >  drivers/tty/serial/xilinx_uartps.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/tty/serial/xilinx_uartps.c
> > b/drivers/tty/serial/xilinx_uartps.c
> > index a3020344ac9d..c4437e8929ff 100644
> > --- a/drivers/tty/serial/xilinx_uartps.c
> > +++ b/drivers/tty/serial/xilinx_uartps.c
> > @@ -691,7 +691,7 @@ static void cdns_uart_set_termios(struct uart_port
> > *port,
> >
> >     if (termios->c_iflag & IGNPAR)
> >             port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
> > -                   CDNS_UART_IXR_FRAMING |
> CDNS_UART_IXR_OVERRUN;
> > +                                       CDNS_UART_IXR_FRAMING;
> >
> >     /* ignore all characters if CREAD is not set */
> >     if ((termios->c_cflag & CREAD) == 0)
> >



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.