[RFT PATCH] arm: netwinder_defconfig: convert to use libata PATA drivers

[Bartlomiej Zolnierkiewicz]

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts netwinder_defconfig to use libata PATA
drivers.

Cc: Russell King <linux at arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
---
Build tested only.
If you have affected hardware please test.  Thank you.

 arch/arm/configs/netwinder_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 25ed772..a890a93 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -7,7 +7,7 @@ CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=0x301"
+CONFIG_CMDLINE="root=0x801"
 CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_NET=y
@@ -26,8 +26,9 @@ CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_SUPERIO=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_WINBOND=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-- 
1.9.1