[PATCH v3 0/6] genirq: irqdomain_hierarchy: fixes
Grygorii Strashko
grygorii.strashko at ti.com
Fri Aug 14 05:20:24 PDT 2015
Hi All,
I've had able to identify and reproduce four issues related to switching on
using IRQ domain hierarchy on TI OMAP DRA7 (dra7-evm). Most of them were
discovered during testing of Suspend to RAM and IRQ wakeup functionality.
In my opinion, most of these issue could also affect on other ARM SoC if
they are using IRQ domain hierarchy.
In case of TI OMAP DRA7 the following IRQ hierarchy is defined:
ARM GIC <- OMAP wakeupgen <- TI CBAR
Issue 1 - patch 1: IRQ re-triggering is not working if IRQ domain
hierarchy used in combination with ARM GIC and irq_chip_retrigger_hierarchy()
is used by child IRQ domain.
Issue 2 - patches 2-4: ARM GIC IRQ triggering type is not configured
properly when IRQ is routed through IRQ domain hierarchy and
system started using DT. As result, system will start using default
ARM GIC configuration, ignore DT IRQ triggering configuration,
and value of desc->irq_data.state_use_accessors = 0.
/ # cat /proc/interrupts -- before
230: 0 0 CBAR 30 Edge -00000000 48051000.gpio
263: 0 0 CBAR 116 Edge -00000000 48053000.gpio
296: 246 0 CBAR 67 Edge -00000000 OMAP UART0
311: 341 0 CBAR 51 Edge -00000000 48070000.i2c
312: 3 0 CBAR 52 Edge -00000000 48072000.i2c
313: 0 0 CBAR 56 Edge -00000000 48060000.i2c
314: 255 0 CBAR 78 Edge -00000000 mmc0
315: 40 0 CBAR 81 Edge -00000000 mmc1
316: 13 0 CBAR 91 Edge -00000000 mmc2
320: 0 0 CBAR 49 Edge -00000000 4a140000.sata
324: 0 0 CBAR 1 Edge -00000000 48078000.elm
325: 0 0 CBAR 15 Edge -00000000 gpmc
333: 0 0 CBAR 335 Edge -00000000 48484000.ethernet
334: 0 0 CBAR 336 Edge -00000000 48484000.ethernet
415: 0 0 pcf857x 2 Edge -00000000 btnUser1
416: 0 0 pcf857x 3 Edge -00000000 btnUser2
445: 0 0 pinctrl 992 Edge -00010000 4806a000.seria
/ # cat /proc/interrupts -- after
230: 0 0 CBAR 30 Level -00002004 48051000.gpio
263: 0 0 CBAR 116 Level -00002004 48053000.gpio
296: 567 0 CBAR 67 Level -00002004 OMAP UART0
311: 363 0 CBAR 51 Level -00002004 48070000.i2c
312: 3 0 CBAR 52 Level -00002004 48072000.i2c
313: 0 0 CBAR 56 Level -00002004 48060000.i2c
314: 197 0 CBAR 78 Level -00002004 mmc0
315: 40 0 CBAR 81 Level -00002004 mmc1
316: 13 0 CBAR 91 Level -00002004 mmc2
320: 0 0 CBAR 49 Level -00002004 4a140000.sata
324: 0 0 CBAR 1 Level -00002004 48078000.elm
325: 0 0 CBAR 15 Level -00002004 gpmc
333: 0 0 CBAR 335 Level -00002004 48484000.ethernet
334: 0 0 CBAR 336 Level -00002004 48484000.ethernet
415: 0 0 pcf857x 2 Edge -00000000 btnUser1
416: 4 2 pcf857x 3 Edge -00000000 btnUser2
445: 0 0 pinctrl 992 Edge -00010000 4806a000.serial
-xxxxxxxx are current values of desc->irq_data.state_use_accessors
Issue 3 - patch 5: ARM GIC IRQs are not masked during suspend even
if they are not wakeup source.
This issue related to IRQCHIP MASK ON SUSPEND flag usage and,
honestly, it's not clear how this flag has to be processed in
case of IRQ domain hierarchy - previously there was one IRQ chip per IRQ
desc and if it has IRQCHIP MASK ON SUSPEND flag set we had to mask IRQ.
But now there are up to three (DRA7) IRQ chip per IRQ desc, and all of them
could have different IRQCHIP MASK ON SUSPEND flag's configuration.
Here, to fix an issue, I've just added IRQCHIP MASK ON SUSPEND flag
to TI Crossbar which is the last IRQ domain in hierarchy.
Issue 4 - patch 6: On TI dra7-evm, when irq_set_irq_type() is called for
IRQ which belongs to IRQ domain hierarchy the .irq_set_wake() callback
will be executed for TI Crossbar IRQ chip. The TI Crossbar doesn't provides
any facility to configure the wakeup sources, but it implements
.irq_set_wake() callback as:
.irq_set_wake = irq_chip_set_wake_parent
As result, the irq_chip_set_wake_parent() will try to execute
.irq_set_wake() callback for parent IRQ domain, which is TI OMAP wakeupgen,
but TI OMAP wakeupgen has IRQCHIP_SKIP_SET_WAKE flag set and do not
implement .irq_set_wake() callback. Thus, irq_chip_set_wake_parent() will
fail with -ENOSYS, but it shouldn't.
IRQ domain hierarchy code was merged in 4.1, so it seems these patches
are material for stable 4.1+.
Tested on:
TI OMAP DRA7, dra7-evm
Series based on:
Linux 4.2-rc6
Changes in v3:
- copy-past issue fixed in patch 'genirq: introduce
irq_chip_set_type_parent() helper'
- dropped patch 'genirq: fix irqchip_set_wake_parent if
IRQCHIP_SKIP_SET_WAKE'
- added patch 'irqchip: crossbar: fix set_wake functionality'
Changes in v2:
- initial patch has been split on three;
- added three more patches.
Links:
v2: https://lkml.org/lkml/2015/8/12/759
v1: https://lkml.org/lkml/2015/8/11/179
Cc: Sudeep Holla <sudeep.holla at arm.com>
Cc: Jiang Liu <jiang.liu at linux.intel.com>
Grygorii Strashko (6):
genirq: fix irq_chip_retrigger_hierarchy
genirq: introduce irq_chip_set_type_parent() helper
irqchip: crossbar: fix arm gic irq type configuration
ARM: OMAP: wakeupgen: fix arm gic irq type configuration
irqchip: crossbar: fix irq masking at suspend
irqchip: crossbar: fix set_wake functionality
arch/arm/mach-omap2/omap-wakeupgen.c | 1 +
drivers/irqchip/irq-crossbar.c | 4 +++-
include/linux/irq.h | 1 +
kernel/irq/chip.c | 19 ++++++++++++++++++-
4 files changed, 23 insertions(+), 2 deletions(-)
--
2.5.0
More information about the linux-arm-kernel
mailing list