[PATCH v2] ARM: dts: exynos4412-odroidu3: Enable SPI1.

[Krzysztof Kozlowski]

W dniu 13.08.2015 o 18:06, Alexis Ballier pisze:
> SPI1 is available on IO Port #2 (as depicted on their website) in
> PCB Revision 0.5 of Hardkernel Odroid U3 board.
> The shield connects a 256KiB spi-nor flash on that bus.
> 
> Signed-off-by: Alexis Ballier <aballier at gentoo.org>
> 
> ---
> 
> Changes in v2: Use GPIO_ACTIVE_HIGH (Krzysztof Kozlowski)
> 
>  arch/arm/boot/dts/exynos4412-odroidu3.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)

Thanks for fixing, looks good:

Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>

Best regards,
Krzysztof