[PATCH v4 10/15] KVM: arm: implement world switch for debug registers
Zhichao Huang
zhichao.huang at linaro.org
Mon Aug 10 06:26:02 PDT 2015
Implement switching of the debug registers. While the number
of registers is massive, CPUs usually don't implement them all
(A15 has 6 breakpoints and 4 watchpoints, which gives us a total
of 22 registers "only").
Signed-off-by: Zhichao Huang <zhichao.huang at linaro.org>
---
arch/arm/kvm/interrupts_head.S | 170 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 159 insertions(+), 11 deletions(-)
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
index 7ac5e51..b9e7410 100644
--- a/arch/arm/kvm/interrupts_head.S
+++ b/arch/arm/kvm/interrupts_head.S
@@ -5,6 +5,7 @@
#define VCPU_USR_SP (VCPU_USR_REG(13))
#define VCPU_USR_LR (VCPU_USR_REG(14))
#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4))
+#define CP14_OFFSET(_cp14_reg_idx) ((_cp14_reg_idx) * 4)
/*
* Many of these macros need to access the VCPU structure, which is always
@@ -239,6 +240,136 @@ vcpu .req r0 @ vcpu pointer always in r0
save_guest_regs_mode irq, #VCPU_IRQ_REGS
.endm
+/* Assume r10/r11/r12 are in use, clobbers r2-r3 */
+.macro cp14_read_and_str base Op2 cp14_reg0 skip_num
+ adr r3, 1f
+ add r3, r3, \skip_num, lsl #3
+ bx r3
+1:
+ mrc p14, 0, r2, c0, c15, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+15)]
+ mrc p14, 0, r2, c0, c14, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+14)]
+ mrc p14, 0, r2, c0, c13, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+13)]
+ mrc p14, 0, r2, c0, c12, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+12)]
+ mrc p14, 0, r2, c0, c11, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+11)]
+ mrc p14, 0, r2, c0, c10, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+10)]
+ mrc p14, 0, r2, c0, c9, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+9)]
+ mrc p14, 0, r2, c0, c8, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+8)]
+ mrc p14, 0, r2, c0, c7, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+7)]
+ mrc p14, 0, r2, c0, c6, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+6)]
+ mrc p14, 0, r2, c0, c5, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+5)]
+ mrc p14, 0, r2, c0, c4, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+4)]
+ mrc p14, 0, r2, c0, c3, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+3)]
+ mrc p14, 0, r2, c0, c2, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+2)]
+ mrc p14, 0, r2, c0, c1, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0+1)]
+ mrc p14, 0, r2, c0, c0, \Op2
+ str r2, [\base, #CP14_OFFSET(\cp14_reg0)]
+.endm
+
+/* Assume r11/r12 are in use, clobbers r2-r3 */
+.macro cp14_ldr_and_write base Op2 cp14_reg0 skip_num
+ adr r3, 1f
+ add r3, r3, \skip_num, lsl #3
+ bx r3
+1:
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+15)]
+ mcr p14, 0, r2, c0, c15, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+14)]
+ mcr p14, 0, r2, c0, c14, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+13)]
+ mcr p14, 0, r2, c0, c13, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+12)]
+ mcr p14, 0, r2, c0, c12, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+11)]
+ mcr p14, 0, r2, c0, c11, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+10)]
+ mcr p14, 0, r2, c0, c10, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+9)]
+ mcr p14, 0, r2, c0, c9, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+8)]
+ mcr p14, 0, r2, c0, c8, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+7)]
+ mcr p14, 0, r2, c0, c7, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+6)]
+ mcr p14, 0, r2, c0, c6, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+5)]
+ mcr p14, 0, r2, c0, c5, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+4)]
+ mcr p14, 0, r2, c0, c4, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+3)]
+ mcr p14, 0, r2, c0, c3, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+2)]
+ mcr p14, 0, r2, c0, c2, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0+1)]
+ mcr p14, 0, r2, c0, c1, \Op2
+ ldr r2, [\base, #CP14_OFFSET(\cp14_reg0)]
+ mcr p14, 0, r2, c0, c0, \Op2
+.endm
+
+/* Get extract number of BRPs and WRPs. Saved in r11/r12 */
+.macro read_hw_dbg_num
+ mrc p14, 0, r2, c0, c0, 0
+ ubfx r11, r2, #24, #4
+ add r11, r11, #1 @ Extract BRPs
+ ubfx r12, r2, #28, #4
+ add r12, r12, #1 @ Extract WRPs
+ mov r2, #16
+ sub r11, r2, r11 @ How many BPs to skip
+ sub r12, r2, r12 @ How many WPs to skip
+.endm
+
+/* Reads cp14 registers from hardware.
+ * Writes cp14 registers in-order to the CP14 struct pointed to by r10
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2-r12
+ */
+.macro save_debug_state
+ read_hw_dbg_num
+ cp14_read_and_str r10, 4, cp14_DBGBVR0, r11
+ cp14_read_and_str r10, 5, cp14_DBGBCR0, r11
+ cp14_read_and_str r10, 6, cp14_DBGWVR0, r12
+ cp14_read_and_str r10, 7, cp14_DBGWCR0, r12
+
+ /* DBGDSCR reg */
+ mrc p14, 0, r2, c0, c1, 0
+ str r2, [r10, #CP14_OFFSET(cp14_DBGDSCRext)]
+.endm
+
+/* Reads cp14 registers in-order from the CP14 struct pointed to by r10
+ * Writes cp14 registers to hardware.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2-r12
+ */
+.macro restore_debug_state
+ read_hw_dbg_num
+ cp14_ldr_and_write r10, 4, cp14_DBGBVR0, r11
+ cp14_ldr_and_write r10, 5, cp14_DBGBCR0, r11
+ cp14_ldr_and_write r10, 6, cp14_DBGWVR0, r12
+ cp14_ldr_and_write r10, 7, cp14_DBGWCR0, r12
+
+ /* DBGDSCR reg */
+ ldr r2, [r10, #CP14_OFFSET(cp14_DBGDSCRext)]
+ mcr p14, 0, r2, c0, c2, 2
+.endm
+
/* Reads cp14/cp15 registers from hardware and stores them in memory
* @store_to_vcpu: If 0, registers are written in-order to the stack,
* otherwise to the VCPU struct pointed to by vcpup
@@ -248,11 +379,17 @@ vcpu .req r0 @ vcpu pointer always in r0
* Clobbers r2 - r12
*/
.macro read_coproc_state store_to_vcpu
- .if \store_to_vcpu == 0
- mrc p14, 0, r2, c0, c1, 0 @ DBGDSCR
- push {r2}
+ .if \store_to_vcpu == 1
+ add r10, vcpu, #VCPU_CP14
+ .else
+ add r10, vcpu, #VCPU_HOST_CONTEXT
+ ldr r10, [r10]
+ add r10, r10, #VCPU_CP14_HOST
.endif
+ /* Assumes r10 pointer in cp14 regs */
+ bl __save_debug_state
+
mrc p15, 0, r2, c1, c0, 0 @ SCTLR
mrc p15, 0, r3, c1, c0, 2 @ CPACR
mrc p15, 0, r4, c2, c0, 2 @ TTBCR
@@ -331,6 +468,17 @@ vcpu .req r0 @ vcpu pointer always in r0
* Assumes vcpu pointer in vcpu reg
*/
.macro write_coproc_state read_from_vcpu
+ .if \read_from_vcpu == 1
+ add r10, vcpu, #VCPU_CP14
+ .else
+ add r10, vcpu, #VCPU_HOST_CONTEXT
+ ldr r10, [r10]
+ add r10, r10, #VCPU_CP14_HOST
+ .endif
+
+ /* Assumes r10 pointer in cp14 regs */
+ bl __restore_debug_state
+
.if \read_from_vcpu == 0
pop {r2,r4-r7}
.else
@@ -399,14 +547,6 @@ vcpu .req r0 @ vcpu pointer always in r0
mcr p15, 0, r10, c10, c2, 0 @ PRRR
mcr p15, 0, r11, c10, c2, 1 @ NMRR
mcr p15, 2, r12, c0, c0, 0 @ CSSELR
-
- .if \read_from_vcpu == 0
- pop {r2}
- .else
- mov r2, #0
- .endif
-
- mcr p14, 0, r2, c0, c2, 2 @ DBGDSCR
.endm
/*
@@ -657,3 +797,11 @@ ARM_BE8(rev r6, r6 )
.macro load_vcpu
mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR
.endm
+
+__save_debug_state:
+ save_debug_state
+ bx lr
+
+__restore_debug_state:
+ restore_debug_state
+ bx lr
--
1.7.12.4
More information about the linux-arm-kernel
mailing list