[PATCH 46/74] clockevents/drivers/u300: Migrate to new 'set-state' interface
Daniel Lezcano
daniel.lezcano at linaro.org
Mon Aug 10 02:52:03 PDT 2015
From: Viresh Kumar <viresh.kumar at linaro.org>
Migrate u300 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
---
drivers/clocksource/timer-u300.c | 155 +++++++++++++++++++--------------------
1 file changed, 77 insertions(+), 78 deletions(-)
diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c
index 5dcf756..1744b24 100644
--- a/drivers/clocksource/timer-u300.c
+++ b/drivers/clocksource/timer-u300.c
@@ -187,85 +187,82 @@ struct u300_clockevent_data {
unsigned ticks_per_jiffy;
};
+static int u300_shutdown(struct clock_event_device *evt)
+{
+ /* Disable interrupts on GP1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DGPT1);
+ return 0;
+}
+
/*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
+ * If we have oneshot timer active, the oneshot scheduling function
* u300_set_next_event() is called immediately after.
*/
-static void u300_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
+static int u300_set_oneshot(struct clock_event_device *evt)
+{
+ /* Just return; here? */
+ /*
+ * The actual event will be programmed by the next event hook,
+ * so we just set a dummy value somewhere at the end of the
+ * universe here.
+ */
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DGPT1);
+ /*
+ * Expire far in the future, u300_set_next_event() will be
+ * called soon...
+ */
+ writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
+ /* We run one shot per tick here! */
+ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
+ /* Enable interrupts for this timer */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Enable timer */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ u300_timer_base + U300_TIMER_APP_EGPT1);
+ return 0;
+}
+
+static int u300_set_periodic(struct clock_event_device *evt)
{
struct u300_clockevent_data *cevdata =
container_of(evt, struct u300_clockevent_data, cevd);
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /*
- * Set the periodic mode to a certain number of ticks per
- * jiffy.
- */
- writel(cevdata->ticks_per_jiffy,
- u300_timer_base + U300_TIMER_APP_GPT1TC);
- /*
- * Set continuous mode, so the timer keeps triggering
- * interrupts.
- */
- writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable timer interrupts */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Then enable the OS timer again */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* Just break; here? */
- /*
- * The actual event will be programmed by the next event hook,
- * so we just set a dummy value somewhere at the end of the
- * universe here.
- */
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /*
- * Expire far in the future, u300_set_next_event() will be
- * called soon...
- */
- writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
- /* We run one shot per tick here! */
- writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable interrupts for this timer */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Enable timer */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- /* Disable interrupts on GP1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- break;
- case CLOCK_EVT_MODE_RESUME:
- /* Ignore this call */
- break;
- }
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DGPT1);
+ /*
+ * Set the periodic mode to a certain number of ticks per
+ * jiffy.
+ */
+ writel(cevdata->ticks_per_jiffy,
+ u300_timer_base + U300_TIMER_APP_GPT1TC);
+ /*
+ * Set continuous mode, so the timer keeps triggering
+ * interrupts.
+ */
+ writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
+ /* Enable timer interrupts */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Then enable the OS timer again */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ u300_timer_base + U300_TIMER_APP_EGPT1);
+ return 0;
}
/*
@@ -309,13 +306,15 @@ static int u300_set_next_event(unsigned long cycles,
static struct u300_clockevent_data u300_clockevent_data = {
/* Use general purpose timer 1 as clock event */
.cevd = {
- .name = "GPT1",
+ .name = "GPT1",
/* Reasonably fast and accurate clock event */
- .rating = 300,
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = u300_set_next_event,
- .set_mode = u300_set_mode,
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = u300_set_next_event,
+ .set_state_shutdown = u300_shutdown,
+ .set_state_periodic = u300_set_periodic,
+ .set_state_oneshot = u300_set_oneshot,
},
};
--
1.9.1
More information about the linux-arm-kernel
mailing list