[PATCH 03/12] gpu: imx: simplify sync polarity setting
Russell King
rmk+kernel at arm.linux.org.uk
Sat Aug 8 09:03:35 PDT 2015
Use a function to convert the sync pin to a bit mask for the DI_GENERAL
register, and move this out of the interlace/non-interlace path to the
common path.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
drivers/gpu/ipu-v3/ipu-di.c | 50 +++++++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index 2970c6bb668c..a96991c5c15f 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -543,6 +543,29 @@ int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
}
EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
+static u32 ipu_di_gen_polarity(int pin)
+{
+ switch (pin) {
+ case 1:
+ return DI_GEN_POLARITY_1;
+ case 2:
+ return DI_GEN_POLARITY_2;
+ case 3:
+ return DI_GEN_POLARITY_3;
+ case 4:
+ return DI_GEN_POLARITY_4;
+ case 5:
+ return DI_GEN_POLARITY_5;
+ case 6:
+ return DI_GEN_POLARITY_6;
+ case 7:
+ return DI_GEN_POLARITY_7;
+ case 8:
+ return DI_GEN_POLARITY_8;
+ }
+ return 0;
+}
+
int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
{
u32 reg;
@@ -586,11 +609,6 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
di_gen |= DI_GEN_POLARITY_8;
vsync_cnt = 7;
-
- if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
- di_gen |= DI_GEN_POLARITY_3;
- if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
- di_gen |= DI_GEN_POLARITY_2;
} else {
ipu_di_sync_config_noninterlaced(di, sig, div);
@@ -602,25 +620,13 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
*/
if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
vsync_cnt = 6;
-
- if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH) {
- if (sig->hsync_pin == 2)
- di_gen |= DI_GEN_POLARITY_2;
- else if (sig->hsync_pin == 4)
- di_gen |= DI_GEN_POLARITY_4;
- else if (sig->hsync_pin == 7)
- di_gen |= DI_GEN_POLARITY_7;
- }
- if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH) {
- if (sig->vsync_pin == 3)
- di_gen |= DI_GEN_POLARITY_3;
- else if (sig->vsync_pin == 6)
- di_gen |= DI_GEN_POLARITY_6;
- else if (sig->vsync_pin == 8)
- di_gen |= DI_GEN_POLARITY_8;
- }
}
+ if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
+ di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
+ if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
+ di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
+
if (sig->clk_pol)
di_gen |= DI_GEN_POLARITY_DISP_CLK;
--
2.1.0
More information about the linux-arm-kernel
mailing list