[PATCH v5 2/2] usb: Add support for ACPI identification to xhci-platform

Duc Dang dhdang at apm.com
Fri Aug 7 20:18:49 PDT 2015


Provide the methods to let ACPI identify the need to use
xhci-platform. Change the Kconfig files so the
xhci-plat.o file is selectable during kernel config.

This has been tested on an ARM64 machine with platform XHCI, an
x86_64 machine with XHCI, and an x86_64 machine without XHCI.
There were no regressions or error messages on the machines
without platform XHCI.

Signed-off-by: Mark Langsdorf <mlangsdo at redhat.com>
Signed-off-by: Duc Dang <dhdang at apm.com>

---
Changes from v4:
	Remove #ifdef CONFIG_ACPI

Changes from v3:
        Regenerate the patch over 4.2-rc5
        No code change

Changes from v2
        Replaced tristate with a boolean as the driver doesn't
                compile as a module
        Correct --help-- to ---help---

Changes from v1
        Renamed from "add support for APM X-Gene to xhci-platform"
        Removed changes to arm64/Kconfig
        Made CONFIG_USB_XHCI_PLATFORM a user selectable config option

 drivers/usb/host/Kconfig     | 7 ++++++-
 drivers/usb/host/xhci-plat.c | 9 +++++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8afc3c1..96231ee 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -32,7 +32,12 @@ config USB_XHCI_PCI
        default y
 
 config USB_XHCI_PLATFORM
-	tristate
+	tristate "xHCI platform driver support"
+	---help---
+	  Say 'Y' to enable the support for the xHCI host controller
+	  as a platform device. Many ARM SoCs provide USB this way.
+
+	  If unsure, say 'Y'.
 
 config USB_XHCI_MVEBU
 	tristate "xHCI support for Marvell Armada 375/38x"
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 5d03f8b..bd282cd 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -19,6 +19,7 @@
 #include <linux/usb/phy.h>
 #include <linux/slab.h>
 #include <linux/usb/xhci_pdriver.h>
+#include <linux/acpi.h>
 
 #include "xhci.h"
 #include "xhci-mvebu.h"
@@ -262,6 +263,13 @@ static const struct of_device_id usb_xhci_of_match[] = {
 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
 #endif
 
+static const struct acpi_device_id usb_xhci_acpi_match[] = {
+	/* APM X-Gene USB Controller */
+	{ "PNP0D10", },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
+
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
@@ -269,6 +277,7 @@ static struct platform_driver usb_xhci_driver = {
 		.name = "xhci-hcd",
 		.pm = DEV_PM_OPS,
 		.of_match_table = of_match_ptr(usb_xhci_of_match),
+		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
 	},
 };
 MODULE_ALIAS("platform:xhci-hcd");
-- 
1.9.1




More information about the linux-arm-kernel mailing list