[PATCH v4 2/2] usb: Add support for ACPI identification to xhci-platform
Duc Dang
dhdang at apm.com
Fri Aug 7 18:03:36 PDT 2015
Provide the methods to let ACPI identify the need to use
xhci-platform. Change the Kconfig files so the
xhci-plat.o file is selectable during kernel config.
This has been tested on an ARM64 machine with platform XHCI, an
x86_64 machine with XHCI, and an x86_64 machine without XHCI.
There were no regressions or error messages on the machines
without platform XHCI.
[dhdang: regenerate the patch over 4.2-rc5]
Signed-off-by: Mark Langsdorf <mlangsdo at redhat.com>
Signed-off-by: Duc Dang <dhdang at apm.com>
---
Changes from v3:
Regenerate the patch over 4.2-rc5
No code change
Changes from v2
Replaced tristate with a boolean as the driver doesn't
compile as a module
Correct --help-- to ---help---
Changes from v1
Renamed from "add support for APM X-Gene to xhci-platform"
Removed changes to arm64/Kconfig
Made CONFIG_USB_XHCI_PLATFORM a user selectable config option
drivers/usb/host/Kconfig | 7 ++++++-
drivers/usb/host/xhci-plat.c | 11 +++++++++++
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8afc3c1..96231ee 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -32,7 +32,12 @@ config USB_XHCI_PCI
default y
config USB_XHCI_PLATFORM
- tristate
+ tristate "xHCI platform driver support"
+ ---help---
+ Say 'Y' to enable the support for the xHCI host controller
+ as a platform device. Many ARM SoCs provide USB this way.
+
+ If unsure, say 'Y'.
config USB_XHCI_MVEBU
tristate "xHCI support for Marvell Armada 375/38x"
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 5d03f8b..14b40d2 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -19,6 +19,7 @@
#include <linux/usb/phy.h>
#include <linux/slab.h>
#include <linux/usb/xhci_pdriver.h>
+#include <linux/acpi.h>
#include "xhci.h"
#include "xhci-mvebu.h"
@@ -262,6 +263,15 @@ static const struct of_device_id usb_xhci_of_match[] = {
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
#endif
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id usb_xhci_acpi_match[] = {
+ /* APM X-Gene USB Controller */
+ { "PNP0D10", },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
+#endif
+
static struct platform_driver usb_xhci_driver = {
.probe = xhci_plat_probe,
.remove = xhci_plat_remove,
@@ -269,6 +279,7 @@ static struct platform_driver usb_xhci_driver = {
.name = "xhci-hcd",
.pm = DEV_PM_OPS,
.of_match_table = of_match_ptr(usb_xhci_of_match),
+ .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
},
};
MODULE_ALIAS("platform:xhci-hcd");
--
1.9.1
More information about the linux-arm-kernel
mailing list