[PATCH v3 07/10] usb: chipidea: usbmisc_imx: add non-burst setting for imx6

[Peter Chen]

With this setting and AHBBRST at SBUSCFG as "Incremental burst of
unspecified length", each non-burst size can be taken as single
transfer. It is benefit for non-burst size transfer.

Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
 drivers/usb/chipidea/usbmisc_imx.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 3cefd49..5ddab30 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -54,6 +54,7 @@
 #define MX53_USB_PHYCTRL1_PLLDIV_MASK	0x3
 #define MX53_USB_PLL_DIV_24_MHZ		0x01
 
+#define MX6_BM_NON_BURST_SETTING	BIT(1)
 #define MX6_BM_OVER_CUR_DIS		BIT(7)
 #define MX6_BM_WAKEUP_ENABLE		BIT(10)
 #define MX6_BM_ID_WAKEUP		BIT(16)
@@ -255,14 +256,21 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 	if (data->index > 3)
 		return -EINVAL;
 
+	spin_lock_irqsave(&usbmisc->lock, flags);
+
 	if (data->disable_oc) {
-		spin_lock_irqsave(&usbmisc->lock, flags);
 		reg = readl(usbmisc->base + data->index * 4);
 		writel(reg | MX6_BM_OVER_CUR_DIS,
 			usbmisc->base + data->index * 4);
-		spin_unlock_irqrestore(&usbmisc->lock, flags);
 	}
 
+	/* SoC non-burst setting */
+	reg = readl(usbmisc->base + data->index * 4);
+	writel(reg | MX6_BM_NON_BURST_SETTING,
+			usbmisc->base + data->index * 4);
+
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
 	usbmisc_imx6q_set_wakeup(data, false);
 
 	return 0;
-- 
1.9.1