[PATCH v4 1/6] cpufreq: make scaling_boost_freqs sysfs attr available when boost is enabled

[Viresh Kumar]

Hi,

I would suggest you sending such patches as reply to the earlier
threads only, instead of a new chain. This will save your time.

For example, you will need to resend other patches unnecessarily if I
NAK this patch :)

On 06-08-15, 15:41, Bartlomiej Zolnierkiewicz wrote:
> Add cpufreq_boost_enabled_generic_attr table and use it in
> cpufreq-dt driver instead of cpufreq_generic_attr one when
> boost support is enabled.  As a result scaling_boost_freqs
> sysfs attribute is available when cpufreq-dt driver is
> used and boost support is enabled.
> 
> Cc: Viresh Kumar <viresh.kumar at linaro.org>
> Cc: Thomas Abraham <thomas.ab at samsung.com>
> Cc: Javier Martinez Canillas <javier at osg.samsung.com>
> Cc: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
> ---
>  drivers/cpufreq/cpufreq-dt.c | 3 +++
>  drivers/cpufreq/freq_table.c | 7 +++++++
>  include/linux/cpufreq.h      | 1 +
>  3 files changed, 11 insertions(+)
> 
> diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> index b9259ab..7b091c0 100644
> --- a/drivers/cpufreq/cpufreq-dt.c
> +++ b/drivers/cpufreq/cpufreq-dt.c
> @@ -182,6 +182,8 @@ try_again:
>  	return ret;
>  }
>  
> +static struct cpufreq_driver dt_cpufreq_driver;
> +
>  static int cpufreq_init(struct cpufreq_policy *policy)
>  {
>  	struct cpufreq_frequency_table *freq_table;
> @@ -336,6 +338,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
>  		ret = cpufreq_enable_boost_support();
>  		if (ret)
>  			goto out_free_cpufreq_table;
> +		dt_cpufreq_driver.attr = cpufreq_boost_enabled_generic_attr;
>  	}
>  
>  	policy->cpuinfo.transition_latency = transition_latency;
> diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
> index a8f1daf..5a00a09 100644
> --- a/drivers/cpufreq/freq_table.c
> +++ b/drivers/cpufreq/freq_table.c
> @@ -300,6 +300,13 @@ struct freq_attr *cpufreq_generic_attr[] = {
>  };
>  EXPORT_SYMBOL_GPL(cpufreq_generic_attr);
>  
> +struct freq_attr *cpufreq_boost_enabled_generic_attr[] = {
> +	&cpufreq_freq_attr_scaling_available_freqs,
> +	&cpufreq_freq_attr_scaling_boost_freqs,
> +	NULL,
> +};
> +EXPORT_SYMBOL_GPL(cpufreq_boost_enabled_generic_attr);

This isn't scalable. We can't create a new generic structure every time
a entry comes in. Rather we should leave the generic attr for
cpufreq-dt and do something like this in the cpufreq-dt driver (And
that patch should rather go via cpufreq tree and not ARM SoC)..

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index a5b6a854661f..e229258ad791 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -36,6 +36,12 @@ struct private_data {
 	unsigned int voltage_tolerance; /* in percentage */
 };
 
+static struct freq_attr *cpufreq_dt_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,	/* Extra space for boost-attr if required */
+	NULL,
+};
+
 static int set_target(struct cpufreq_policy *policy, unsigned int index)
 {
 	struct dev_pm_opp *opp;
@@ -337,6 +343,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		ret = cpufreq_enable_boost_support();
 		if (ret)
 			goto out_free_cpufreq_table;
+		cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
 	}
 
 	policy->cpuinfo.transition_latency = transition_latency;
@@ -412,7 +419,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
 	.exit = cpufreq_exit,
 	.ready = cpufreq_ready,
 	.name = "cpufreq-dt",
-	.attr = cpufreq_generic_attr,
+	.attr = cpufreq_dt_attr,
 };
 
 static int dt_cpufreq_probe(struct platform_device *pdev)

-- 
viresh