[PATCH 11/12] ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
Simon Horman
horms+renesas at verge.net.au
Thu Aug 6 19:12:10 PDT 2015
From: Geert Uytterhoeven <geert+renesas at glider.be>
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.
Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock. This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson at linaro.org>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 3355c487d108..c4654047e684 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -68,6 +68,7 @@
<0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0x60>;
@@ -87,6 +88,7 @@
<0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0xff>;
@@ -109,6 +111,7 @@
<0 16 IRQ_TYPE_LEVEL_HIGH>,
<0 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
+ power-domains = <&cpg_clocks>;
};
scif0: serial at e6e60000 {
@@ -117,6 +120,7 @@
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -126,6 +130,7 @@
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -134,6 +139,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -164,6 +170,7 @@
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "z",
"rcan", "adsp";
+ #power-domain-cells = <0>;
};
/* Variable factor clocks */
--
2.1.4
More information about the linux-arm-kernel
mailing list