[PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
Kukjin Kim
kgene at kernel.org
Thu Aug 6 16:53:18 PDT 2015
Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
Hi Bart,
> This patch series removes the use of Exynos4x12 specific support
> from cpufreq-exynos driver and enables the use of cpufreq-dt driver
> for this platform.
>
Thanks for this series.
> This patch series has been tested on Exynos4412 based Odroid-U3 and
> Trats2 boards.
>
Sounds good.
> Depends on:
> - next-20150806 branch of linux-next kernel tree
> - "[PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings"
> (http://www.spinics.net/lists/arm-kernel/msg435408.html)
>
BTW, hmm...how can we see this series in v4.3?...to be honest, I don't think it
can be done in v4.3 because of dependencies with PM / OPP series and previous
exynos CPU OPP series in each cross trees...maybe that's why you created based
on linux-next...any idea?
Thanks,
Kukjin
> Changes since v3
> (http://thread.gmane.org/gmane.linux.power-management.general/63464):
> - rebased on top of next-20150806 branch of linux-next kernel tree
> - made ARCH_EXYNOS config option select thermal support
> - made scaling_boost_freqs sysfs attribute available only when boost
> support is enabled
> - added Acked-by tag from Viresh to patches #3, #4 and #5
> - added Tested-by tag from Tobias to patches #2-5
> - added Reviewed-by tag from Krzysztof to patch #4
>
> Changes since v2
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/46653):
> - rebased on top of next-20150730 branch of linux-next kernel tree
> - ported over V3 of opp-v2 bindings support patch series
> - put cpu0 nodes in alphabetical order in dts files
> - added Reviewed-by tags from Javier and Krzysztof
> - added Acked-by tag from Sylwester
>
> Changes since v1
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/44361):
> - rebased on top of next-20150629 branch of linux-next kernel tree
> - rebased on top of Exynos5250 cpufreq-dt support patch series
> - fixed if-statement in exynos4_clk_init() (noticed by Tobias Jakobi)
> - ported over opp-v2 bindings (requested by Viresh Kumar)
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (6):
> cpufreq: make scaling_boost_freqs sysfs attr available when boost is
> enabled
> clk: samsung: exynos4x12: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
> ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
> cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
> cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
>
> arch/arm/boot/dts/exynos4212.dtsi | 81 ++++++++
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 4 +
> arch/arm/boot/dts/exynos4412-origen.dts | 4 +
> arch/arm/boot/dts/exynos4412-trats2.dts | 4 +
> arch/arm/boot/dts/exynos4412.dtsi | 83 +++++++++
> arch/arm/mach-exynos/Kconfig | 2 +
> arch/arm/mach-exynos/exynos.c | 2 +
> drivers/clk/samsung/clk-exynos4.c | 50 +++++
> drivers/cpufreq/Kconfig | 4 -
> drivers/cpufreq/Kconfig.arm | 38 ----
> drivers/cpufreq/Makefile | 2 -
> drivers/cpufreq/cpufreq-dt.c | 3 +
> drivers/cpufreq/exynos-cpufreq.c | 236 ------------------------
> drivers/cpufreq/exynos-cpufreq.h | 72 --------
> drivers/cpufreq/exynos4x12-cpufreq.c | 236 ------------------------
> drivers/cpufreq/freq_table.c | 10 +-
> include/linux/cpufreq.h | 1 +
> 17 files changed, 241 insertions(+), 591 deletions(-)
> delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
> delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
> delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
>
> --
> 1.9.1
More information about the linux-arm-kernel
mailing list