[PATCH v6] PCI: Store PCIe bus address in struct of_pci_range

Jingoo Han jingoohan1 at gmail.com
Thu Aug 6 08:06:17 PDT 2015


On Thursday, August 06, 2015 10:53 PM, Gabriele Paoloni wrote:
> 
> Hi all
> 
> This patch has now been moved in "[PATCH v6 1/6] PCI: designware: move calculation of bus addresses to
> DRA7xx"

To Zhou Wang,

Please send your patches to 'jingoohan1 at gmail.com', instead of 'jg1.han at samsung.com'.
Even though, I have done mainline works for Samsung SoCs, Samsung does not support me
as a maintainer. So, please don't send your patches to my Samsung e-mail.

Best regards,
Jingoo Han

> 
> commit "f4c55c5a3f7f (PCI: designware: Program ATU with untranslated address)" has been reverted in
> "[PATCH v6 3/6] PCI: designware: Add ARM64 support"
> 
> Gab
> 
> > -----Original Message-----
> > From: linux-pci-owner at vger.kernel.org [mailto:linux-pci-
> > owner at vger.kernel.org] On Behalf Of Gabriele Paoloni
> > Sent: Tuesday, August 04, 2015 11:12 AM
> > To: Jingoo Han
> > Cc: Rob Herring; Kishon Vijay Abraham I; Bjorn Helgaas; arnd at arndb.de;
> > lorenzo.pieralisi at arm.com; Wangzhou (B); robh+dt at kernel.org;
> > james.morse at arm.com; Liviu.Dudau at arm.com; linux-pci at vger.kernel.org;
> > linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org;
> > Yuanzhichang; Zhudacai; zhangjukuo; qiuzhenfa; Liguozhu (Kenneth);
> > Pratyush Anand; Arnd Bergmann
> > Subject: RE: [PATCH v6] PCI: Store PCIe bus address in struct
> > of_pci_range
> >
> >
> >
> > > -----Original Message-----
> > > From: Jingoo Han [mailto:jingoohan1 at gmail.com]
> > > Sent: Tuesday, August 04, 2015 5:20 AM
> > > To: Gabriele Paoloni
> > > Cc: Rob Herring; Kishon Vijay Abraham I; Bjorn Helgaas; arnd at arndb.de;
> > > lorenzo.pieralisi at arm.com; Wangzhou (B); robh+dt at kernel.org;
> > > james.morse at arm.com; Liviu.Dudau at arm.com; linux-pci at vger.kernel.org;
> > > linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org;
> > > Yuanzhichang; Zhudacai; zhangjukuo; qiuzhenfa; Liguozhu (Kenneth);
> > > Pratyush Anand; Arnd Bergmann; jingoohan1 at gmail.com
> > > Subject: Re: [PATCH v6] PCI: Store PCIe bus address in struct
> > > of_pci_range
> > >
> > > On 2015. 8. 3., at PM 8:18, Gabriele Paoloni
> > > <gabriele.paoloni at huawei.com> wrote:
> > > >
> > > > Rob, Kishon what about the following solution?....
> > > >
> > > > ---
> > > > drivers/pci/host/pci-dra7xx.c      | 12 ++++++++++++
> > > > drivers/pci/host/pcie-designware.c |  9 +++------
> > >
> > > Hi Paoloni,
> > >
> > > OK, it looks good.
> > > I want you to revert the following patch.
> > >
> > > commit "f4c55c5a3f7f (PCI: designware: Program ATU with untranslated
> > > address)"
> > >
> > > Would you remove all '*_mode_base's?
> >
> > Hi Jingoo Han,
> >
> > If I reverted the commit, in order to get designware working, dra7
> > should mask directly the CPU addresses stored in pp->cfg0_base,
> > pp->cfg1_base, pp->mem_base and pp->io_base.
> >
> > The masking would happen at this point:
> > http://lxr.free-electrons.com/source/drivers/pci/host/pcie-
> > designware.c#L493
> >
> > Now:
> > - I see that pp->cfg<0/1>_base are used in devm_ioremap before that
> >   point and nowhere else, so they should be ok.
> > - pp->mem_base is used in dw_pcie_setup_rc(); dw_pcie_setup_rc() is
> > called
> >   in dra7xx_pcie_host_init()...so here I should move the masking after
> >   dw_pcie_setup() retuned, but I think it should be ok
> > - pp->io_base is used in pci_ioremap_io() in dw_pcie_setup(). Now
> > currently
> >   in designware this is called by pci_bios_init_hw(); this is after the
> >   masking....so here we would have a the wrong value passed
> >
> > Said that if you look at "[PATCH v5 2/5] PCI: designware: Add ARM64
> > support",
> > that is the patchset where this patch is needed, you can see that
> > dw_pcie_setup() is removed and pp->io_base is used in
> > pci_remap_iospace() before
> > the masking would happen in dra7xx_pcie_host_init()...so for this
> > patchset we
> > should be good to revert the commit.
> >
> > I propose to add a new patch in the patchset "[PATCH v5 0/5] PCI: hisi:
> > Add PCIe
> > host support for HiSilicon SoC Hip05" as the one I just posted in this
> > thread (this would not revert the commit but just moves the masking to
> > dra7xx)
> >
> > I would revert the commit in "[PATCH v5 2/5] PCI: designware: Add ARM64
> > support"
> > together with the rest of designware rework.
> >
> > So we would have always a working version of designware...
> >
> > Are you ok with this?
> >
> > >
> > > Best regards,
> > > Jingoo Han
> > >
> > > > 2 files changed, 15 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-
> > > dra7xx.c
> > > > index 80db09e..bb2635f 100644
> > > > --- a/drivers/pci/host/pci-dra7xx.c
> > > > +++ b/drivers/pci/host/pci-dra7xx.c
> > > > @@ -61,6 +61,7 @@
> > > >
> > > > #define    PCIECTRL_DRA7XX_CONF_PHY_CS            0x010C
> > > > #define    LINK_UP                        BIT(16)
> > > > +#define CPU_TO_BUS_ADDR             0x0FFFFFFF
> > > >
> > > > struct dra7xx_pcie {
> > > >    void __iomem        *base;
> > > > @@ -138,6 +139,17 @@ static void
> > dra7xx_pcie_enable_interrupts(struct
> > > pcie_port *pp)
> > > >
> > > > static void dra7xx_pcie_host_init(struct pcie_port *pp)
> > > > {
> > > > +    if (pp->io_mod_base)
> > > > +        pp->io_mod_base &= CPU_TO_BUS_ADDR;
> > > > +
> > > > +    if (pp->mem_mod_base)
> > > > +        pp->mem_mod_base &= CPU_TO_BUS_ADDR;
> > > > +
> > > > +    if (pp->cfg0_mod_base) {
> > > > +        pp->cfg0_mod_base &= CPU_TO_BUS_ADDR;
> > > > +        pp->cfg1_mod_base &= CPU_TO_BUS_ADDR;
> > > > +    }
> > > > +
> > > >    dw_pcie_setup_rc(pp);
> > > >    dra7xx_pcie_establish_link(pp);
> > > >    if (IS_ENABLED(CONFIG_PCI_MSI))
> > > > diff --git a/drivers/pci/host/pcie-designware.c
> > > b/drivers/pci/host/pcie-designware.c
> > > > index 69486be..06c682b 100644
> > > > --- a/drivers/pci/host/pcie-designware.c
> > > > +++ b/drivers/pci/host/pcie-designware.c
> > > > @@ -416,8 +416,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
> > > >            pp->io_base = range.cpu_addr;
> > > >
> > > >            /* Find the untranslated IO space address */
> > > > -            pp->io_mod_base = of_read_number(parser.range -
> > > > -                             parser.np + na, ns);
> > > > +            pp->io_mod_base = range.cpu_addr;;
> > > >        }
> > > >        if (restype == IORESOURCE_MEM) {
> > > >            of_pci_range_to_resource(&range, np, &pp->mem);
> > > > @@ -426,8 +425,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
> > > >            pp->mem_bus_addr = range.pci_addr;
> > > >
> > > >            /* Find the untranslated MEM space address */
> > > > -            pp->mem_mod_base = of_read_number(parser.range -
> > > > -                              parser.np + na, ns);
> > > > +            pp->mem_mod_base = range.cpu_addr;
> > > >        }
> > > >        if (restype == 0) {
> > > >            of_pci_range_to_resource(&range, np, &pp->cfg);
> > > > @@ -437,8 +435,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
> > > >            pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
> > > >
> > > >            /* Find the untranslated configuration space address */
> > > > -            pp->cfg0_mod_base = of_read_number(parser.range -
> > > > -                               parser.np + na, ns);
> > > > +            pp->cfg0_mod_base = range.cpu_addr;
> > > >            pp->cfg1_mod_base = pp->cfg0_mod_base +
> > > >                        pp->cfg0_size;
> > > >        }
> > > > --
> > > > 1.9.1
> > > >
> > > >
> > > >> -----Original Message-----
> > > >> From: linux-pci-owner at vger.kernel.org [mailto:linux-pci-
> > > >> owner at vger.kernel.org] On Behalf Of Rob Herring
> > > >> Sent: Friday, July 31, 2015 5:53 PM
> > > >> To: Kishon Vijay Abraham I
> > > >> Cc: Gabriele Paoloni; Bjorn Helgaas; arnd at arndb.de;
> > > >> lorenzo.pieralisi at arm.com; Wangzhou (B); robh+dt at kernel.org;
> > > >> james.morse at arm.com; Liviu.Dudau at arm.com; linux-
> > pci at vger.kernel.org;
> > > >> linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org;
> > > >> Yuanzhichang; Zhudacai; zhangjukuo; qiuzhenfa; Liguozhu (Kenneth);
> > > >> Jingoo Han; Pratyush Anand; Arnd Bergmann
> > > >> Subject: Re: [PATCH v6] PCI: Store PCIe bus address in struct
> > > >> of_pci_range
> > > >>
> > > >> On Fri, Jul 31, 2015 at 9:57 AM, Kishon Vijay Abraham I
> > > <kishon at ti.com>
> > > >> wrote:
> > > >>> +Arnd
> > > >>>
> > > >>> Hi,
> > > >>>
> > > >>>> On Friday 31 July 2015 07:55 PM, Gabriele Paoloni wrote:
> > > >>>> [+cc Kishon]
> > > >>>>
> > > >>>>> -----Original Message-----
> > > >>>>> From: linux-pci-owner at vger.kernel.org [mailto:linux-pci-
> > > >>>>> owner at vger.kernel.org] On Behalf Of Rob Herring
> > > >>>>> Sent: Thursday, July 30, 2015 9:42 PM
> > > >>>>> To: Gabriele Paoloni
> > > >>>>> Cc: Bjorn Helgaas; arnd at arndb.de; lorenzo.pieralisi at arm.com;
> > > >> Wangzhou
> > > >>>>> (B); robh+dt at kernel.org; james.morse at arm.com;
> > Liviu.Dudau at arm.com;
> > > >>>>> linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> > > >>>>> devicetree at vger.kernel.org; Yuanzhichang; Zhudacai; zhangjukuo;
> > > >>>>> qiuzhenfa; Liguozhu (Kenneth); Jingoo Han; Pratyush Anand
> > > >>>>> Subject: Re: [PATCH v6] PCI: Store PCIe bus address in struct
> > > >>>>> of_pci_range
> > > >>>>>
> > > >>>>> On Thu, Jul 30, 2015 at 12:34 PM, Gabriele Paoloni
> > > >>>>> <gabriele.paoloni at huawei.com> wrote:
> > > >>>>>>> -----Original Message-----
> > > >>>>>>> From: Bjorn Helgaas [mailto:bhelgaas at google.com]
> > > >>>>>>> Sent: 30 July 2015 18:15
> > > >>>>>>> On Thu, Jul 30, 2015 at 04:50:55PM +0000, Gabriele Paoloni
> > > wrote:
> > > >>>>>>>>> -----Original Message-----
> > > >>>>>>>>> From: linux-pci-owner at vger.kernel.org [mailto:linux-pci-
> > > >>>>>>>>> owner at vger.kernel.org] On Behalf Of Bjorn Helgaas
> > > >>>>>>>>> Sent: Thursday, July 30, 2015 5:15 PM
> > > >>>>>>>>> On Thu, Jul 30, 2015 at 01:52:13PM +0000, Gabriele Paoloni
> > > >> wrote:
> > > >>>>>
> > > >>>>> [...]
> > > >>>>>
> > > >>>>>>>>>> I don’t think we should rely on [CPU] addresses...what if
> > > the
> > > >>>>>>>>> intermediate
> > > >>>>>>>>>> translation layer changes the lower significant bits of
> > the
> > > >>>>> "bus
> > > >>>>>>>>> address"
> > > >>>>>>>>>> to translate into a cpu address?
> > > >>>>>>>>>
> > > >>>>>>>>> Is it really a possiblity that the lower bits could be
> > > changed?
> > > >>>>>>>>
> > > >>>>>>>> I've checked all the current deignware users DTs except
> > "pci-
> > > >>>>>>> layerscape"
> > > >>>>>>>> that I could not find:
> > > >>>>>>>> spear1310.dtsi
> > > >>>>>>>> spear1340.dtsi
> > > >>>>>>>> dra7.dtsi
> > > >>>>>>>> imx6qdl.dtsi
> > > >>>>>>>> imx6sx.dtsi
> > > >>>>>>>> keystone.dtsi
> > > >>>>>>>> exynos5440.dtsi
> > > >>>>>>>>
> > > >>>>>>>> None of them modifies the lower bits. To be more precise the
> > > >> only
> > > >>>>> guy
> > > >>>>>>>> that provides another translation layer is "dra7.dtsi":
> > > >>>>>>>> axi0
> > > >>>>>>>> http://lxr.free-
> > > >>>>> electrons.com/source/arch/arm/boot/dts/dra7.dtsi#L207
> > > >>>>>>>>
> > > >>>>>>>> axi1
> > > >>>>>>>> http://lxr.free-
> > > >>>>> electrons.com/source/arch/arm/boot/dts/dra7.dtsi#L241
> > > >>>>>>>>
> > > >>>>>>>> For this case masking the top 4bits (bits28 to 31) should
> > make
> > > >> the
> > > >>>>> job.
> > > >>>>>
> > > >>>>> IMO, we should just fix this case. After further study, I don't
> > > >> think
> > > >>>>> this is a DW issue, but rather an SOC integration issue.
> > > >>>>>
> > > >>>>> I believe you can just fixup the address in the pp->ops-
> > > >host_init
> > > >> hook.
> > > >>>>
> > > >>>> Yes I guess that I could just assign pp->(*)_mod_base to the CPU
> > > >> address
> > > >>>> in DW and mask it out in dra7xx_pcie_host_init()...
> > > >>>>
> > > >>>> Kishon, would you be ok with that?
> > > >>>
> > > >>> Initially I was using *base-mask* property from dt. Me and Arnd
> > > >> (cc'ed) had
> > > >>> this discussion [1] before we decided the current approach. It'll
> > > be
> > > >> good to
> > > >>> check with Arnd too.
> > > >>>
> > > >>> [1] ->  http://lists.infradead.org/pipermail/linux-arm-
> > kernel/2014-
> > > >> May/253528.html
> > > >>
> > > >> The problem I have here is the use of ranges does not necessarily
> > > mean
> > > >> fewer address bits are available. It can be used just for
> > > convenience
> > > >> of not putting the full address into every node's reg property.
> > And
> > > >> vice versa, there are probably plenty of cases where we have the
> > > full
> > > >> address in the nodes, but really only some of the address bits are
> > > >> decoded at the IP block. Whether the address bits are present is
> > > >> rarely cared about or known by s/w folks until you hit a problem
> > > like
> > > >> this. Given this is an isolated case ATM, I would fix it in an
> > > >> isolated way. It does not affect the binding and could be changed
> > in
> > > >> the kernel later if this becomes a common need.
> > > >>
> > > >> Rob
> > > >> --
> > > >> To unsubscribe from this list: send the line "unsubscribe linux-
> > pci"
> > > in
> > > >> the body of a message to majordomo at vger.kernel.org
> > > >> More majordomo info at  http://vger.kernel.org/majordomo-info.html




More information about the linux-arm-kernel mailing list