[PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform

[Bartlomiej Zolnierkiewicz]

Hi,

This patch series removes the use of Exynos4x12 specific support
from cpufreq-exynos driver and enables the use of cpufreq-dt driver
for this platform.

This patch series has been tested on Exynos4412 based Odroid-U3 and
Trats2 boards.

Depends on:
- next-20150806 branch of linux-next kernel tree
- "[PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings"
  (http://www.spinics.net/lists/arm-kernel/msg435408.html)

Changes since v3
(http://thread.gmane.org/gmane.linux.power-management.general/63464):
- rebased on top of next-20150806 branch of linux-next kernel tree
- made ARCH_EXYNOS config option select thermal support
- made scaling_boost_freqs sysfs attribute available only when boost
  support is enabled
- added Acked-by tag from Viresh to patches #3, #4 and #5
- added Tested-by tag from Tobias to patches #2-5
- added Reviewed-by tag from Krzysztof to patch #4

Changes since v2
(http://thread.gmane.org/gmane.linux.kernel.samsung-soc/46653):
- rebased on top of next-20150730 branch of linux-next kernel tree
- ported over V3 of opp-v2 bindings support patch series
- put cpu0 nodes in alphabetical order in dts files
- added Reviewed-by tags from Javier and Krzysztof
- added Acked-by tag from Sylwester

Changes since v1
(http://thread.gmane.org/gmane.linux.kernel.samsung-soc/44361):
- rebased on top of next-20150629 branch of linux-next kernel tree
- rebased on top of Exynos5250 cpufreq-dt support patch series
- fixed if-statement in exynos4_clk_init() (noticed by Tobias Jakobi)
- ported over opp-v2 bindings (requested by Viresh Kumar)

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (6):
  cpufreq: make scaling_boost_freqs sysfs attr available when boost is
    enabled
  clk: samsung: exynos4x12: add cpu clock configuration data and
    instantiate cpu clock
  ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
  ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
  cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
  cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option

 arch/arm/boot/dts/exynos4212.dtsi               |  81 ++++++++
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi |   4 +
 arch/arm/boot/dts/exynos4412-origen.dts         |   4 +
 arch/arm/boot/dts/exynos4412-trats2.dts         |   4 +
 arch/arm/boot/dts/exynos4412.dtsi               |  83 +++++++++
 arch/arm/mach-exynos/Kconfig                    |   2 +
 arch/arm/mach-exynos/exynos.c                   |   2 +
 drivers/clk/samsung/clk-exynos4.c               |  50 +++++
 drivers/cpufreq/Kconfig                         |   4 -
 drivers/cpufreq/Kconfig.arm                     |  38 ----
 drivers/cpufreq/Makefile                        |   2 -
 drivers/cpufreq/cpufreq-dt.c                    |   3 +
 drivers/cpufreq/exynos-cpufreq.c                | 236 ------------------------
 drivers/cpufreq/exynos-cpufreq.h                |  72 --------
 drivers/cpufreq/exynos4x12-cpufreq.c            | 236 ------------------------
 drivers/cpufreq/freq_table.c                    |  10 +-
 include/linux/cpufreq.h                         |   1 +
 17 files changed, 241 insertions(+), 591 deletions(-)
 delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
 delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
 delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c

-- 
1.9.1