[PATCH v4 1/3] PCI: generic: remove dependency on hw_pci
Jayachandran C
jchandra at broadcom.com
Tue Aug 4 13:53:38 PDT 2015
The current code in pci-host-generic.c uses pci_common_init_dev()
from arm architecture to do some part of the PCI setup, and this
prevents it from being used with arm64 architecture.
The part of pci_common_init_dev() that is really needed by
pci-host-generic.c is very limited and can be done in the same
file without using hw_pci API of ARM. The ARM platform requires
a pci_sys_data as sysdata for the PCI bus, this can be handled by
setting up gen_pci to have a pci_sys_data variable as the first
element.
Signed-off-by: Jayachandran C <jchandra at broadcom.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Tested-by: Pavel Fedin <p.fedin at samsung.com>
---
Here's v4 of the patchset.
v3-v4
- Changes for comments by Lorenzo Pieralisi/Will Deacon
- add PCI_REASSIGN_ALL_BUS flag if not probe only
- split setup-irq.o into another patch
- minor clean up of commit messages
v2-v3
- rebase to 4.2-rc
- fix PCI_PROBE_ONLY check before calling pcie configure
- added a comment above sysdata
- updated the commit message
v1->v2
- Address comments from Arnd Bergmann and Lorenzo Pieralisi
- move contents of gen_pci_init to gen_pci_probe
- assign resources only when !probe_only
- tested on ARM32 with qemu option -M virt
Notes:
- passing a zeroed out pci_sys_data for ARM looks ok, but I haven't
tested it on ARM.
- tested it on ARM64 fast model
- Any information on how this can be tested on arm is welcome.
- There is only one ifdef, and that can be removed when arm64 gets
a sysdata, or when arm loses its sysdata.
drivers/pci/host/pci-host-generic.c | 55 ++++++++++++++++++++++++-------------
1 file changed, 36 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
index ba46e58..53703e3 100644
--- a/drivers/pci/host/pci-host-generic.c
+++ b/drivers/pci/host/pci-host-generic.c
@@ -38,7 +38,15 @@ struct gen_pci_cfg_windows {
const struct gen_pci_cfg_bus_ops *ops;
};
+/*
+ * ARM needs platform specific pci_sys_data as the sysdata for PCI.
+ * We add the sys as the first field below to handle this. sys will
+ * set to 0, so that the pci functions in do the right thing.
+ */
struct gen_pci {
+#ifdef CONFIG_ARM
+ struct pci_sys_data sys;
+#endif
struct pci_host_bridge host;
struct gen_pci_cfg_windows cfg;
struct list_head resources;
@@ -48,8 +56,7 @@ static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus,
unsigned int devfn,
int where)
{
- struct pci_sys_data *sys = bus->sysdata;
- struct gen_pci *pci = sys->private_data;
+ struct gen_pci *pci = bus->sysdata;
resource_size_t idx = bus->number - pci->cfg.bus_range->start;
return pci->cfg.win[idx] + ((devfn << 8) | where);
@@ -64,8 +71,7 @@ static void __iomem *gen_pci_map_cfg_bus_ecam(struct pci_bus *bus,
unsigned int devfn,
int where)
{
- struct pci_sys_data *sys = bus->sysdata;
- struct gen_pci *pci = sys->private_data;
+ struct gen_pci *pci = bus->sysdata;
resource_size_t idx = bus->number - pci->cfg.bus_range->start;
return pci->cfg.win[idx] + ((devfn << 12) | where);
@@ -198,13 +204,6 @@ static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
return 0;
}
-static int gen_pci_setup(int nr, struct pci_sys_data *sys)
-{
- struct gen_pci *pci = sys->private_data;
- list_splice_init(&pci->resources, &sys->resources);
- return 1;
-}
-
static int gen_pci_probe(struct platform_device *pdev)
{
int err;
@@ -214,13 +213,7 @@ static int gen_pci_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
- struct hw_pci hw = {
- .nr_controllers = 1,
- .private_data = (void **)&pci,
- .setup = gen_pci_setup,
- .map_irq = of_irq_parse_and_map_pci,
- .ops = &gen_pci_ops,
- };
+ struct pci_bus *bus;
if (!pci)
return -ENOMEM;
@@ -258,7 +251,31 @@ static int gen_pci_probe(struct platform_device *pdev)
return err;
}
- pci_common_init_dev(dev, &hw);
+ /* do not reassign resource if probe only */
+ if (!pci_has_flag(PCI_PROBE_ONLY))
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
+
+ bus = pci_scan_root_bus(dev, 0, &gen_pci_ops, pci, &pci->resources);
+ if (!bus) {
+ dev_err(dev, "Scanning rootbus failed");
+ return -ENODEV;
+ }
+
+ pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+
+ if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ }
+ pci_bus_add_devices(bus);
+
+ /* Configure PCI Express settings */
+ if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ struct pci_bus *child;
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+ }
return 0;
}
--
1.9.1
More information about the linux-arm-kernel
mailing list