[PATCH v4 08/10] ACPI: GIC: Add ACPI helper functions to query irq-domain tokens for for GIC MSI and ITS
Marc Zyngier
marc.zyngier at arm.com
Tue Aug 4 07:02:05 PDT 2015
On 29/07/15 11:08, Hanjun Guo wrote:
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
>
> This patch introduces acpi_gic_get_msi_token(), which returns irq-domain
> token that can be used to look up MSI doamin of a device.
> In both GIC MSI and ITS cases, the base_address specified in the GIC MSI
> or GIC ITS structure is used as a token for MSI domain.
>
> In addition, this patch also provides low-level helper functions to parse
> and query GIC MSI structure and GIC ITS from MADT. Once parsed, it keeps
> a copy of the structure for use in subsequent queries to avoid having
> to map and parse MADT multiple times.
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
> ---
> drivers/acpi/Makefile | 1 +
> drivers/acpi/acpi_gic.c | 234 ++++++++++++++++++++++++++++++++++++++++++++++++
> include/acpi/acpi_gic.h | 23 +++++
> include/linux/acpi.h | 1 +
> 4 files changed, 259 insertions(+)
> create mode 100644 drivers/acpi/acpi_gic.c
> create mode 100644 include/acpi/acpi_gic.h
>
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 8321430..def54b9 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -54,6 +54,7 @@ acpi-$(CONFIG_ACPI_NUMA) += numa.o
> acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
> acpi-y += acpi_lpat.o
> acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o
> +acpi-$(CONFIG_ARM_GIC_ACPI) += acpi_gic.o
>
> # These are (potentially) separate modules
>
> diff --git a/drivers/acpi/acpi_gic.c b/drivers/acpi/acpi_gic.c
> new file mode 100644
> index 0000000..11ee4eb
> --- /dev/null
> +++ b/drivers/acpi/acpi_gic.c
I think this is starting badly. If this is GIC specific, it lives in
drivers/irqchip. Nothing in drivers/acpi should be interrupt-controller
specific at all. If there are things you need to expose through the ACPI
layer, add some indirections.
> @@ -0,0 +1,234 @@
> +/*
> + * File: acpi_gic.c
> + *
> + * ACPI helper functions for ARM GIC
> + *
> + * Copyright (C) 2015 Advanced Micro Devices, Inc.
> + * Authors: Suravee Suthikulpanit <suravee.suthikulpanit at amd.com>
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/init.h>
> +
> +/*
> + * GIC MSI Frame data structures
> + */
> +struct gic_msi_frame_handle {
> + struct list_head list;
> + struct acpi_madt_generic_msi_frame frame;
> +};
> +
> +static LIST_HEAD(msi_frame_list);
> +
> +static int acpi_num_msi;
> +
> +/*
> + * GIC ITS data structures
> + */
> +struct gic_its_handle {
> + struct list_head list;
> + struct acpi_madt_generic_translator trans;
> +};
> +
> +static LIST_HEAD(its_list);
> +
> +static int acpi_num_its;
> +
> +/*
> + * GIC MSI Frame parsing stuff
> + */
> +inline int acpi_gic_get_num_msi_frame(void)
> +{
> + return acpi_num_msi;
> +}
Really???
> +
> +static int __init
> +acpi_parse_madt_msi(struct acpi_subtable_header *header,
> + const unsigned long end)
> +{
> + struct gic_msi_frame_handle *h;
> + struct acpi_madt_generic_msi_frame *frame;
> +
> + frame = (struct acpi_madt_generic_msi_frame *)header;
> + if (BAD_MADT_ENTRY(frame, end))
> + return -EINVAL;
> +
> + h = kzalloc(sizeof(struct gic_msi_frame_handle *), GFP_KERNEL);
> + if (!h)
> + return -ENOMEM;
> +
> + /** Note:
> + * We make a copy of this structure since this code is called
> + * prior to acpi_early_init(), which sets the acpi_gbl_permanent_mmap.
> + * Therefore, we could not keep just the pointer sincce the memory
> + * could be unmapped.
> + */
> + memcpy(&h->frame, frame, sizeof(struct acpi_madt_generic_msi_frame));
> +
> + list_add(&h->list, &msi_frame_list);
> +
> + return 0;
> +}
> +
> +int __init acpi_gic_msi_init(struct acpi_table_header *table)
> +{
> + int ret = 0;
> +
> + if (acpi_num_msi > 0)
> + return ret;
> +
> + ret = acpi_parse_entries(ACPI_SIG_MADT,
> + sizeof(struct acpi_table_madt),
> + acpi_parse_madt_msi, table,
> + ACPI_MADT_TYPE_GENERIC_MSI_FRAME, 0);
> + if (ret == 0) {
> + pr_debug("No valid ACPI GIC MSI FRAME exist\n");
> + return ret;
> + }
> +
> + acpi_num_msi = ret;
> + return 0;
> +}
> +
> +int acpi_gic_get_msi_frame(int index, struct acpi_madt_generic_msi_frame **p)
> +{
> + int i = 0;
> + struct gic_msi_frame_handle *m;
> +
> + if (index >= acpi_num_msi)
> + return -EINVAL;
> +
> + list_for_each_entry(m, &msi_frame_list, list) {
> + if (i == index)
> + break;
> + i++;
> + }
> +
> + if (i == acpi_num_msi)
> + return -EINVAL;
> +
> + *p = &(m->frame);
> + return 0;
> +}
> +
> +/*
> + * GIC ITS parsing stuff
> + */
> +inline int acpi_gic_get_num_its(void)
> +{
> + return acpi_num_its;
> +}
> +
> +static int __init
> +acpi_parse_madt_its(struct acpi_subtable_header *header,
> + const unsigned long end)
> +{
> + struct gic_its_handle *h;
> + struct acpi_madt_generic_translator *trans;
> +
> + trans = (struct acpi_madt_generic_translator *)header;
> + if (BAD_MADT_ENTRY(trans, end))
> + return -EINVAL;
> +
> + h = kzalloc(sizeof(struct gic_its_handle *), GFP_KERNEL);
> + if (!h)
> + return -ENOMEM;
> +
> + memcpy(&h->trans, trans, sizeof(struct acpi_madt_generic_translator));
> +
> + list_add(&h->list, &its_list);
> +
> + return 0;
> +}
> +
> +int __init acpi_gic_madt_gic_its_init(struct acpi_table_header *table)
> +{
> + int ret = 0;
> +
> + if (acpi_num_its > 0)
> + return ret;
> +
> + ret = acpi_parse_entries(ACPI_SIG_MADT,
> + sizeof(struct acpi_table_madt),
> + acpi_parse_madt_its, table,
> + ACPI_MADT_TYPE_GENERIC_TRANSLATOR, 0);
> + if (ret == 0) {
> + pr_debug("No valid ACPI GIC ITS exist\n");
> + return ret;
> + }
> +
> + acpi_num_its = ret;
> + return 0;
> +}
> +
> +int acpi_gic_get_its(int index, struct acpi_madt_generic_translator **p)
> +{
> + int i = 0;
> + struct gic_its_handle *m;
> +
> + if (index >= acpi_num_its)
> + return -EINVAL;
> +
> + list_for_each_entry(m, &its_list, list) {
> + if (i == index)
> + break;
> + i++;
> + }
> +
> + if (i == acpi_num_its)
> + return -EINVAL;
> +
> + *p = &(m->trans);
> + return 0;
> +}
> +
> +static void *acpi_gic_msi_token(struct device *dev)
> +{
> + int err;
> + struct acpi_madt_generic_msi_frame *msi;
> +
> + /**
> + * Since ACPI 5.1 currently does not define
> + * a way to associate MSI frame ID to a device,
> + * we can only support single MSI frame (index 0)
> + * at the moment.
> + */
> + err = acpi_gic_get_msi_frame(0, &msi);
> + if (err)
> + return NULL;
> +
> + return (void *) msi->base_address;
> +}
> +
> +static void *acpi_gic_its_token(struct device *dev)
> +{
> + int err;
> + struct acpi_madt_generic_translator *trans;
> + int its_id = 0;
> +
> + /**
> + * TODO: We need a way to retrieve GIC ITS ID from
> + * struct device pointer (in this case, the device
> + * would be the PCI host controller.
> + *
> + * This would be done by the IORT-related code.
> + *
> + * its_id = get_its_id(dev);
> + */
> +
> + err = acpi_gic_get_its(its_id, &trans);
> + if (err)
> + return NULL;
> +
> + return (void *) trans->base_address;
> +}
> +
> +void *acpi_gic_get_msi_token(struct device *dev)
> +{
> + void *token = acpi_gic_msi_token(dev);
> +
> + if (!token)
> + token = acpi_gic_its_token(dev);
> +
> + return token;
> +}
> diff --git a/include/acpi/acpi_gic.h b/include/acpi/acpi_gic.h
> new file mode 100644
> index 0000000..34fa475
> --- /dev/null
> +++ b/include/acpi/acpi_gic.h
> @@ -0,0 +1,23 @@
> +/*
> + * include/acpi/acpi_gic.h
> + *
> + * Copyright (C) 2015 Advanced Micro Devices, Inc.
> + * Authors: Suravee Suthikulpanit <suravee.suthikulpanit at amd.com>
> + */
> +
> +#ifndef __ACPI_GIC_H__
> +#define __ACPI_GIC_H__
> +
> +#ifdef CONFIG_ACPI
> +int acpi_gic_get_num_msi_frame(void);
> +int acpi_gic_msi_init(struct acpi_table_header *table);
> +int acpi_gic_get_msi_frame(int index, struct acpi_madt_generic_msi_frame **p);
> +
> +int acpi_gic_get_num_its(void);
> +int acpi_gic_its_init(struct acpi_table_header *table);
> +int acpi_gic_get_its(int index, struct acpi_madt_generic_translator **p);
> +
> +void *acpi_gic_get_msi_token(struct device *dev);
> +#endif
> +
> +#endif /*__ACPI_GIC_H__*/
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 04dd0bb..5d58b61 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -44,6 +44,7 @@
>
> #include <acpi/acpi_bus.h>
> #include <acpi/acpi_drivers.h>
> +#include <acpi/acpi_gic.h>
Ah! No.
> #include <acpi/acpi_numa.h>
> #include <acpi/acpi_io.h>
> #include <asm/acpi.h>
>
Right. Very little of what is above belongs to the ACPI layer. What
would belong here is a generic acpi_get_msi_domain_token(dev) that would
call into a controller-specific function to parse the various tables and
find out which GICv2m frame (or which ITS) is serving the given device.
This would include parsing of the IORT structures if they are available.
For GICv2m, it should be simplistic: just return the domain_token of the
v2m widget. For the ITS, it is slightly more complex, and there should
be some specific backend for that. There is no ACPI support for the ITS
yet, so that shouldn't be your concern at this point in time.
Overall, drivers/acpi should be hardware agnostic (or at least aim for
it), just like drivers/of is.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
More information about the linux-arm-kernel
mailing list