[PATCH 3/6] gpiolib-of: Reuse 'line-name' from DT as gpio descriptor name

[Markus Pargmann]

The DT describes gpios with subnodes. These subnodes can contain a
property 'line-name'. This information can be useful in other areas
where we want to identify a GPIO by its name.

This patch stores the line-name in the gpio descriptor.

Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
 drivers/gpio/gpiolib-of.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 41a4945b346e..fbf449a4120b 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -184,11 +184,6 @@ static struct gpio_desc *of_parse_gpio(struct device_node *np,
 		*dflags |= GPIOD_OUT_LOW;
 	else if (of_property_read_bool(np, "output-high"))
 		*dflags |= GPIOD_OUT_HIGH;
-	else {
-		pr_warn("GPIO line %d (%s): no hogging state specified, bailing out\n",
-			desc_to_gpio(gg_data.out_gpio), np->name);
-		return ERR_PTR(-EINVAL);
-	}
 
 	if (name && of_property_read_string(np, "line-name", name))
 		*name = np->name;
@@ -214,15 +209,29 @@ static void of_gpiochip_scan_gpios(struct gpio_chip *chip)
 	enum gpiod_flags dflags;
 
 	for_each_child_of_node(chip->of_node, np) {
-		if (!of_property_read_bool(np, "gpio-hog"))
-			continue;
+		struct gpio_desc *name_desc;
 
 		desc = of_parse_gpio(np, &name, &lflags, &dflags);
 		if (IS_ERR(desc))
 			continue;
 
-		if (gpiod_hog(desc, name, lflags, dflags))
-			continue;
+		name_desc = gpio_name_to_desc(name);
+		if (name_desc)
+			pr_warn("GPIO name collision for '%s' detected at GPIO line %d (%s)\n",
+				name, desc_to_gpio(desc), np->name);
+		else
+			desc->name = name;
+
+		if (of_property_read_bool(np, "gpio-hog")) {
+			if (!dflags) {
+				pr_warn("GPIO line %d (%s): no hogging state specified, bailing out\n",
+					desc_to_gpio(desc), np->name);
+				continue;
+			}
+
+			if (gpiod_hog(desc, name, lflags, dflags))
+				continue;
+		}
 	}
 }
 
-- 
2.1.4