[PATCH v3 1/6] mmc: sdhci-esdhc-imx: add imx7d support and support HS400
Dong Aisheng
aisheng.dong at freescale.com
Mon Aug 3 05:09:34 PDT 2015
On Sun, Aug 02, 2015 at 04:59:04PM +0800, Chen Haibo-B51421 wrote:
>
>
> > -----Original Message-----
> > From: Dong Aisheng [mailto:aisheng.dong at freescale.com]
> > Sent: Friday, July 31, 2015 10:15 PM
> > To: Chen Haibo-B51421
> > Cc: robh+dt at kernel.org; pawel.moll at arm.com; mark.rutland at arm.com;
> > ijc+devicetree at hellion.org.uk; galak at codeaurora.org; shawnguo at kernel.org;
> > kernel at pengutronix.de; linux at arm.linux.org.uk; ulf.hansson at linaro.org;
> > johan.derycke at barco.com; Estevam Fabio-R49496; Dong Aisheng-B29396;
> > devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-
> > kernel at lists.infradead.org; linux-mmc at vger.kernel.org
> > Subject: Re: [PATCH v3 1/6] mmc: sdhci-esdhc-imx: add imx7d support and
> > support HS400
> >
> > On Wed, Jul 29, 2015 at 05:03:52PM +0800, Haibo Chen wrote:
> > > The imx7d usdhc is derived from imx6sx, the difference is that imx7d
> > > support HS400.
> > >
> > > So introduce a new compatible string for imx7d and add HS400 support
> > > for imx7d usdhc.
> > >
> > > Signed-off-by: Haibo Chen <haibo.chen at freescale.com>
> > > ---
> > > drivers/mmc/host/sdhci-esdhc-imx.c | 66
> > > ++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 66 insertions(+)
> > >
> > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
> > > b/drivers/mmc/host/sdhci-esdhc-imx.c
> > > index c6b9f64..b441eed 100644
> > > --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> > > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> > > @@ -44,6 +44,7 @@
> > > #define ESDHC_MIX_CTRL_EXE_TUNE (1 << 22)
> > > #define ESDHC_MIX_CTRL_SMPCLK_SEL (1 << 23)
> > > #define ESDHC_MIX_CTRL_FBCLK_SEL (1 << 25)
> > > +#define ESDHC_MIX_CTRL_HS400_EN (1 << 26)
> > > /* Bits 3 and 6 are not SDHCI standard definitions */
> > > #define ESDHC_MIX_CTRL_SDHCI_MASK 0xb7
> > > /* Tuning bits */
> > > @@ -60,6 +61,16 @@
> > > #define ESDHC_TUNE_CTRL_MIN 0
> > > #define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1)
> > >
> > > +/* strobe dll register */
> > > +#define ESDHC_STROBE_DLL_CTRL 0x70
> > > +#define ESDHC_STROBE_DLL_CTRL_ENABLE (1 << 0)
> > > +#define ESDHC_STROBE_DLL_CTRL_RESET (1 << 1)
> > > +#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT 3
> > > +
> > > +#define ESDHC_STROBE_DLL_STATUS 0x74
> > > +#define ESDHC_STROBE_DLL_STS_REF_LOCK (1 << 1)
> > > +#define ESDHC_STROBE_DLL_STS_SLV_LOCK 0x1
> > > +
> > > #define ESDHC_TUNING_CTRL 0xcc
> > > #define ESDHC_STD_TUNING_EN (1 << 24)
> > > /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ @@
> > > -120,6 +131,8 @@
> > > #define ESDHC_FLAG_ERR004536 BIT(7)
> > > /* The IP supports HS200 mode */
> > > #define ESDHC_FLAG_HS200 BIT(8)
> > > +/* The IP supports HS400 mode */
> > > +#define ESDHC_FLAG_SUP_HS400 BIT(9)
> > >
> > > struct esdhc_soc_data {
> > > u32 flags;
> > > @@ -156,6 +169,12 @@ static struct esdhc_soc_data usdhc_imx6sx_data = {
> > > | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200, };
> > >
> > > +static struct esdhc_soc_data usdhc_imx7d_data = {
> > > + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
> > > + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
> > > + | ESDHC_FLAG_SUP_HS400,
> > > +};
> > > +
> > > struct pltfm_imx_data {
> > > u32 scratchpad;
> > > struct pinctrl *pinctrl;
> > > @@ -199,6 +218,7 @@ static const struct of_device_id imx_esdhc_dt_ids[]
> > = {
> > > { .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, },
> > > { .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, },
> > > { .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, },
> > > + { .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, },
> > > { /* sentinel */ }
> > > };
> > > MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); @@ -274,6 +294,10 @@
> > > static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
> > > val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
> > > | SDHCI_SUPPORT_SDR50
> > > | SDHCI_USE_SDR50_TUNING;
> > > +
> > > + /* imx7d does not have a support_hs400 register, fake
> > one */
> >
> > You could remove this line.
> > It's bit, not register and i think no need such comment.
> >
> > > + if (imx_data->socdata->flags & ESDHC_FLAG_SUP_HS400)
> > > + val |= SDHCI_SUPPORT_HS400;
> > > }
> > > }
> > >
> > > @@ -774,6 +798,7 @@ static int esdhc_change_pinstate(struct sdhci_host
> > *host,
> > > break;
> > > case MMC_TIMING_UHS_SDR104:
> > > case MMC_TIMING_MMC_HS200:
> > > + case MMC_TIMING_MMC_HS400:
> > > pinctrl = imx_data->pins_200mhz;
> > > break;
> > > default:
> > > @@ -784,6 +809,30 @@ static int esdhc_change_pinstate(struct sdhci_host
> > *host,
> > > return pinctrl_select_state(imx_data->pinctrl, pinctrl); }
> > >
> > > +static void esdhc_set_strobe_dll(struct sdhci_host *host)
> >
> > It would be good if we can add some comments for this function for better
> > understand.
> >
>
> [haibo] okay, I will add comments here.
>
> > > +{
> > > + u32 v;
> > > +
> > > + /* force a reset on strobe dll */
> > > + writel(ESDHC_STROBE_DLL_CTRL_RESET, host->ioaddr +
> > ESDHC_STROBE_DLL_CTRL);
> > > + /*
> > > + * enable strobe dll ctrl and adjust the delay target
> > > + * for the uSDHC loopback read clock
> > > + */
> > > + v = ESDHC_STROBE_DLL_CTRL_ENABLE |
> > > + (7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
> > > + writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL);
> > > + /* wait 1us to make sure strobe dll status register stable */
> > > + udelay(1);
> > > + v = readl(host->ioaddr + ESDHC_STROBE_DLL_STATUS);
> > > + if (!(v & ESDHC_STROBE_DLL_STS_REF_LOCK))
> > > + dev_warn(mmc_dev(host->mmc),
> > > + "warning! HS400 strobe DLL status REF not lock!\n");
> > > + if (!(v & ESDHC_STROBE_DLL_STS_SLV_LOCK))
> > > + dev_warn(mmc_dev(host->mmc),
> > > + "warning! HS400 strobe DLL status SLV not lock!\n"); }
> > > +
> > > static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned
> > > timing) {
> > > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -795,7
> > > +844,13 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host,
> > unsigned timing)
> > > case MMC_TIMING_UHS_SDR25:
> > > case MMC_TIMING_UHS_SDR50:
> > > case MMC_TIMING_UHS_SDR104:
> > > + break;
> > > case MMC_TIMING_MMC_HS200:
> > > + /* disable ddr mode and disable HS400 mode */
> > > + writel(readl(host->ioaddr + ESDHC_MIX_CTRL) &
> > > + ~(ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN),
> > > + host->ioaddr + ESDHC_MIX_CTRL);
> > > + imx_data->is_ddr = 0;
> > > break;
> > > case MMC_TIMING_UHS_DDR50:
> > > case MMC_TIMING_MMC_DDR52:
> > > @@ -813,6 +868,14 @@ static void esdhc_set_uhs_signaling(struct
> > sdhci_host *host, unsigned timing)
> > > writel(v, host->ioaddr + ESDHC_DLL_CTRL);
> > > }
> > > break;
> > > + case MMC_TIMING_MMC_HS400:
> > > + writel(readl(host->ioaddr + ESDHC_MIX_CTRL) |
> > > + ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN,
> > > + host->ioaddr + ESDHC_MIX_CTRL);
> > > + imx_data->is_ddr = 1;
> > > + if (host->clock == 200000000)
> >
> > I can't remember, but could this be a range required by SoC?
>
> [haibo]we should set strobe_dll only when the host clock is 200MHz. For other condition, no need to do this.
>
It is not quite make sense for only 200Mhz clock here.
First, shall we check host->mmc->actual_clock instead of host->clock?
That is the real clock frequency the controller is working on.
Second, even MMC core requests to set 200Mhz clock for HS400, the real
clock controller working on may be less than 200Mhz which depends on the
uSDHC root clock capability.
e.g. it may be 192Mhz if the parent is 384Mhz or less.
If that, do we need call strobe_dll too?
Can you check above two concerns?
Regards
Dong Aisheng
> >
> > > + esdhc_set_strobe_dll(host);
> > > + break;
> > > }
> > >
> > > esdhc_change_pinstate(host, timing); @@ -1100,6 +1163,9 @@ static
> > > int sdhci_esdhc_imx_probe(struct platform_device *pdev)
> > > if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
> > > host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
> > >
> > > + if (imx_data->socdata->flags & ESDHC_FLAG_SUP_HS400)
> > > + host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
> > > +
> > > if (of_id)
> > > err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
> > > else
> > > --
> > > 1.9.1
> > >
> >
> > Regards
> > Dong Aisheng
More information about the linux-arm-kernel
mailing list