[PATCH v7 3/5] Documentation: Add documentation for the APM X-Gene SoC EDAC DTS binding

[Arnd Bergmann]

On Thursday 30 April 2015 17:36:16 Rob Herring wrote:
> > Now let us discuss the DT layout if it is an single driver:
> >
> > xgeneedac: xgeneedac at 7e800000 {
> >         compatible = "apm,xgene-edac";
> >         regmap-efuse = <&efuse>; /* efuse */
> >         reg = <0x0 0x78800000 0x0 0x100>, /* Top level interrupt
> > status resource */
> >                 <0x0 0x7e200000 0x0 0x1000>, /* CSW for MCB active resource
> >                 <0x0 0x7e700000 0x0 0x1000>, /* MCB A resource */
> >                 <0x0 0x7e720000 0x0 0x1000>, /* MCB B resource */
> >                 <0x0 0x7e800000 0x0 0x1000>, /* MCU 0 resource */
> >                 <0x0 0x7e840000 0x0 0x1000>, /* MCU 1 resource */
> >                 <0x0 0x7e880000 0x0 0x1000>, /* MCU 2 resource */
> >                 <0x0 0x7e8c0000 0x0 0x1000>, /* MCU 3 resource */
> >                 <0x0 0x7c000000 0x0 0x200000>, /* CPU 0 domain for L1 and L2 */
> >                 <0x0 0x7c200000 0x0 0x200000>, /* CPU 1 domain for L1 and L2 */
> >                 <0x0 0x7c400000 0x0 0x200000>, /* CPU 2 domain for L1 and L2 */
> >                 <0x0 0x7c600000 0x0 0x200000>, /* CPU 3 domain for L1 and L2 */
> >                 <0x0 0x7e600000 0x0 0x1000>, /* L3 resource */
> >                 <0x0 0x7e930000 0x0 0x1000>, /* SoC bus resource */
> >                 <0x0 0x7e000000 0x0 0x1000>, /* SoC device resource */
> 
> Uggg, no. You were on the right track earlier in the thread. One node
> per instance of each block.
> 

I agree these should be separate nodes, but I also think that we want a
separate node for the pcp/pcperror/xgeneedac device. The compatible
string for that should match whatever the datasheet calls that block,
no idea why we now have the third name for that.

The specific parts could either be subnodes of the pcperror device,
or they could be separate device nodes that reference the pcperror
device through a phandle, so the driver can make the connection between
them. This probably depends on what exactly all those nodes are:
if the registers in there are all exclusively related to EDAC handling
of the pcperror, subnodes would be best, but if the registers also
contain functionality that is not related to EDAC handling, we
probably want to have separate top-level nodes that a driver could
bind to, e.g. for doing power management on the memory controller.

	Arnd