[PATCH] arm64: dts: Add idle-states for Juno
Liviu Dudau
Liviu.Dudau at arm.com
Thu Apr 30 08:42:07 PDT 2015
On Thu, Apr 30, 2015 at 02:57:48PM +0100, Jon Medhurst (Tixy) wrote:
> From: Jon Medhurst <tixy at linaro.org>
>
> Signed-off-by: Jon Medhurst <tixy at linaro.org>
> ---
>
> These have been kicking around out of tree for ages, any reason they
> shouldn't be in mainline? Also, was unsure of what to put in commit
> message.
Hi Tixy,
Re: commit message: maybe a note on the firmware version and kernel
version where this has been tested on?
Best regards,
Liviu
>
> arch/arm64/boot/dts/arm/juno.dts | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
> index 133ee59..7a9a449 100644
> --- a/arch/arm64/boot/dts/arm/juno.dts
> +++ b/arch/arm64/boot/dts/arm/juno.dts
> @@ -34,12 +34,35 @@
> #address-cells = <2>;
> #size-cells = <0>;
>
> + idle-states {
> + entry-method = "arm,psci";
> +
> + CPU_SLEEP_0: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x0010000>;
> + local-timer-stop;
> + entry-latency-us = <100>;
> + exit-latency-us = <250>;
> + min-residency-us = <2000>;
> + };
> +
> + CLUSTER_SLEEP_0: cluster-sleep-0 {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x1010000>;
> + local-timer-stop;
> + entry-latency-us = <800>;
> + exit-latency-us = <700>;
> + min-residency-us = <2500>;
> + };
> + };
> +
> A57_0: cpu at 0 {
> compatible = "arm,cortex-a57","arm,armv8";
> reg = <0x0 0x0>;
> device_type = "cpu";
> enable-method = "psci";
> next-level-cache = <&A57_L2>;
> + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> };
>
> A57_1: cpu at 1 {
> @@ -48,6 +71,7 @@
> device_type = "cpu";
> enable-method = "psci";
> next-level-cache = <&A57_L2>;
> + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> };
>
> A53_0: cpu at 100 {
> @@ -56,6 +80,7 @@
> device_type = "cpu";
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> };
>
> A53_1: cpu at 101 {
> @@ -64,6 +89,7 @@
> device_type = "cpu";
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> };
>
> A53_2: cpu at 102 {
> @@ -72,6 +98,7 @@
> device_type = "cpu";
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> };
>
> A53_3: cpu at 103 {
> @@ -80,6 +107,7 @@
> device_type = "cpu";
> enable-method = "psci";
> next-level-cache = <&A53_L2>;
> + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> };
>
> A57_L2: l2-cache0 {
> --
> 2.1.4
>
>
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the linux-arm-kernel
mailing list