[PATCH v3 3/6] usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.

[Peter Griffin]

There is a subtle typo phys-names should be phy-names. Using the
current example means you don't have working usb (as you fail to
obtain the phys). Also update the example to use the generic phy
type constants which are now used for miphy28.

Additionally also remove the unnecessary new line in the example.

Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
Acked-by: Rob Herring <robh at kernel.org>
Acked-by: Maxime Coquelin <maxime.coquelin at st.com>
---
 Documentation/devicetree/bindings/usb/dwc3-st.txt | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index f9d7025..01c71b1 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -49,8 +49,7 @@ st_dwc3: dwc3 at 8f94000 {
 	st,syscfg	= <&syscfg_core>;
 	resets		= <&powerdown STIH407_USB3_POWERDOWN>,
 			  <&softreset STIH407_MIPHY2_SOFTRESET>;
-	reset-names	= "powerdown",
-			  "softreset";
+	reset-names	= "powerdown", "softreset";
 	#address-cells	= <1>;
 	#size-cells	= <1>;
 	pinctrl-names	= "default";
@@ -62,7 +61,7 @@ st_dwc3: dwc3 at 8f94000 {
 		reg		= <0x09900000 0x100000>;
 		interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
 		dr_mode		= "host";
-		phys-names      = "usb2-phy", "usb3-phy";
-		phys            = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>;
+		phy-names	= "usb2-phy", "usb3-phy";
+		phys		= <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>;
 	};
 };
-- 
1.9.1