[PATCH v3 0/7] ARM: at91/dt: kizbox: update and rename to at91-kizbox

[Gaël PORTAY]

Hi,

This patchset renames the kizbox board into at91-kizbox to match AT91 naming
convention, sanitize and sorts nodes by address when possible (or
alphabetically if not applicable).

It also updates the following features:
- uses proper serial uart (only USART3 is accessible),
- fixes gpio-keys active level and rename,
- moves leds to pwm support (using tcb-pwm driver) and rename as well,
- re-sizes nand mtd partitions and
- updates chosen-node (bootargs + set linux stdout path to DBGU),

Regards,
Gaël PORTAY

Changes since v1:
- Split into patches for review

Changes since v2:
- Rebase onto v4.0.1
- Change board-name in comments at rename (patch 1)

Gaël PORTAY (7):
  ARM: at91/dt: kizbox: rename to at91-kizbox
  ARM: at91/dt: at91-kizbox: sanitize file
  ARM: at91/dt: at91-kizbox: user proper serial uart
  ARM: at91/dt: at91-kizbox: gpio-keys related changes
  ARM: at91/dt: at91-kizbox: leds related changes
  ARM: at91/dt: at91-kizbox: re-size nand partitions
  ARM: at91/dt: at91-kizbox: update chosen node

 arch/arm/boot/dts/Makefile        |   2 +-
 arch/arm/boot/dts/at91-kizbox.dts | 159 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/kizbox.dts      | 150 -----------------------------------
 3 files changed, 160 insertions(+), 151 deletions(-)
 create mode 100644 arch/arm/boot/dts/at91-kizbox.dts
 delete mode 100644 arch/arm/boot/dts/kizbox.dts

-- 
1.9.1