[PATCH 1/2] arm/arm64: ACPI: Introduce CONFIG_ACPI_MUST_HAVE_CCA

[Suravee Suthikulpanit]

On 04/29/2015 09:42 AM, Catalin Marinas wrote:
> On Wed, Apr 29, 2015 at 09:31:03AM -0500, Suravee Suthikulpanit wrote:
>>
>>
>> On 04/29/2015 09:04 AM, Catalin Marinas wrote:
>>> On Wed, Apr 29, 2015 at 08:44:08AM -0500, Suravee Suthikulpanit wrote:
>>>>  From ACPIv6 (http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf),
>>>> section 6.2.17 _CCA states that ARM platforms require ACPI _CCA object to be
>>>> specified for DMA-cabpable devices. This patch introduces ACPI_MUST_HAVE_CCA
>>>> in arm and arm64 Kconfig to specify such requirement.
>>>>
>>>> Note that when _CCA is required, if it is missing in the DSDT. ACPI driver
>>>> will default to setting up devices as non-coherent.
>>>>
>>>> Signed-off-by: Mark Salter <msalter at redhat.com>
>>>> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
>>>> ---
>>>>   arch/arm/Kconfig     | 1 +
>>>>   arch/arm64/Kconfig   | 1 +
>>>>   drivers/acpi/Kconfig | 3 +++
>>>>   3 files changed, 5 insertions(+)
>>>>
>>>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>>>> index 45df48b..2a0d036 100644
>>>> --- a/arch/arm/Kconfig
>>>> +++ b/arch/arm/Kconfig
>>>> @@ -1,6 +1,7 @@
>>>>   config ARM
>>>>   	bool
>>>>   	default y
>>>> +	select ACPI_MUST_HAVE_CCA if ACPI
>>>>   	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
>>>>   	select ARCH_HAS_ELF_RANDOMIZE
>>>>   	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
>>>
>>> Any plans for ACPI on 32-bit ARM?
>>
>> Not that I am aware, but I could be totally wrong. The reason I am adding
>> this here for 32-bit ARM is because the ACPI spec mentioned this.
>>
>> If you think this is not necessary until we introduce ACPI for ARM32, it can
>> be removed.
>
> I think it should be removed (as long as ACPI cannot be selected on
> arm32).
>

Ok, I'll remove that in V2.

Thanks,

Suravee