[PATCH] ARM: BCM2835: Skip doing our own iotable_init() initialization.

Lee Jones lee at kernel.org
Mon Apr 27 11:25:26 PDT 2015


On Thu, 23 Apr 2015, Eric Anholt wrote:

> The only thing we were using this 16MB mapping of IO peripherals for
> was the uart's early debug mapping.  If we just drop the map_io hook,
> the kernel will call debug_ll_io_init() for us, which maps the single
> page needed for the device.
> 
> Signed-off-by: Eric Anholt <eric at anholt.net>
> ---
>  arch/arm/mach-bcm/board_bcm2835.c | 17 -----------------
>  1 file changed, 17 deletions(-)

Applied with Stephen's Ack.

> diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
> index 70f2f39..9851ee8 100644
> --- a/arch/arm/mach-bcm/board_bcm2835.c
> +++ b/arch/arm/mach-bcm/board_bcm2835.c
> @@ -31,10 +31,6 @@
>  #define PM_RSTC_WRCFG_FULL_RESET	0x00000020
>  #define PM_RSTS_HADWRH_SET		0x00000040
>  
> -#define BCM2835_PERIPH_PHYS	0x20000000
> -#define BCM2835_PERIPH_VIRT	0xf0000000
> -#define BCM2835_PERIPH_SIZE	SZ_16M
> -
>  static void __iomem *wdt_regs;
>  
>  /*
> @@ -93,18 +89,6 @@ static void bcm2835_power_off(void)
>  	bcm2835_restart(REBOOT_HARD, "");
>  }
>  
> -static struct map_desc io_map __initdata = {
> -	.virtual = BCM2835_PERIPH_VIRT,
> -	.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
> -	.length = BCM2835_PERIPH_SIZE,
> -	.type = MT_DEVICE
> -};
> -
> -static void __init bcm2835_map_io(void)
> -{
> -	iotable_init(&io_map, 1);
> -}
> -
>  static void __init bcm2835_init(void)
>  {
>  	int ret;
> @@ -129,7 +113,6 @@ static const char * const bcm2835_compat[] = {
>  };
>  
>  DT_MACHINE_START(BCM2835, "BCM2835")
> -	.map_io = bcm2835_map_io,
>  	.init_irq = irqchip_init,
>  	.init_machine = bcm2835_init,
>  	.restart = bcm2835_restart,



More information about the linux-arm-kernel mailing list