[PATCH 2/4] ARM: at91/dt: sama5d3 xplained: add mmc0 vqmmc entry

[Ludovic Desroches]

From: Ben Dooks <ben.dooks at codethink.co.uk>

The SAM5D3 Xplained device tree is missing the vqmmc node which is
tied to 3.3V on the board. Add this to avoid the kernel warning that
there is no vqmmc node.

atmel_mci f0000000.mmc: No vqmmc regulator found

Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
---
 arch/arm/boot/dts/at91-sama5d3_xplained.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index af8b263..61922b3 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -35,6 +35,7 @@
 		apb {
 			mmc0: mmc at f0000000 {
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				vqmmc-supply = <&vcc_3v3_reg>;
 				status = "okay";
 				slot at 0 {
 					reg = <0>;
-- 
2.2.0