[RFC 5/7] arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes

[Lina Iyer]

On Thu, Apr 23 2015 at 07:52 -0600, Rajendra Nayak wrote:
>Add thermal zones, tsens and eeprom nodes

I dont see corresponding patches for 8084 and 8916.

-- Lina
>
>Signed-off-by: Rajendra Nayak <rnayak at codeaurora.org>
>---
> arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 105 insertions(+)
>
>diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
>index e265ec1..5716e89 100644
>--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
>+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
>@@ -57,6 +57,88 @@
> 		};
> 	};
>
>+	thermal-zones {
>+		cpu-thermal0 {
>+			polling-delay-passive = <250>;
>+			polling-delay = <1000>;
>+
>+			thermal-sensors = <&tsens 5>;
>+
>+			trips {
>+				cpu_alert0: trip at 0 {
>+					temperature = <100000>;
>+					hysteresis = <2000>;
>+					type = "passive";
>+				};
>+				cpu_crit0: trip at 1 {
>+					temperature = <125000>;
>+					hysteresis = <2000>;
>+					type = "critical";
>+				};
>+			};
>+		};
>+
>+		cpu-thermal1 {
>+			polling-delay-passive = <250>;
>+			polling-delay = <1000>;
>+
>+			thermal-sensors = <&tsens 6>;
>+
>+			trips {
>+				cpu_alert1: trip at 0 {
>+					temperature = <100000>;
>+					hysteresis = <2000>;
>+					type = "passive";
>+				};
>+				cpu_crit1: trip at 1 {
>+					temperature = <125000>;
>+					hysteresis = <2000>;
>+					type = "critical";
>+				};
>+			};
>+		};
>+
>+		cpu-thermal2 {
>+			polling-delay-passive = <250>;
>+			polling-delay = <1000>;
>+
>+			thermal-sensors = <&tsens 7>;
>+
>+			trips {
>+				cpu_alert2: trip at 0 {
>+					temperature = <100000>;
>+					hysteresis = <2000>;
>+					type = "passive";
>+				};
>+				cpu_crit2: trip at 1 {
>+					temperature = <125000>;
>+					hysteresis = <2000>;
>+					type = "critical";
>+				};
>+			};
>+		};
>+
>+		cpu-thermal3 {
>+			polling-delay-passive = <250>;
>+			polling-delay = <1000>;
>+
>+			thermal-sensors = <&tsens 8>;
>+
>+			trips {
>+				cpu_alert3: trip at 0 {
>+					temperature = <100000>;
>+					hysteresis = <2000>;
>+					type = "passive";
>+				};
>+				cpu_crit3: trip at 1 {
>+					temperature = <125000>;
>+					hysteresis = <2000>;
>+					type = "critical";
>+				};
>+			};
>+		};
>+	};
>+
> 	cpu-pmu {
> 		compatible = "qcom,krait-pmu";
> 		interrupts = <1 7 0xf04>;
>@@ -85,6 +167,29 @@
> 			      <0xf9002000 0x1000>;
> 		};
>
>+		qfprom: qfprom at fc4bc000 {
>+			#address-cells = <1>;
>+			#size-cells = <1>;
>+			compatible = "qcom,qfprom";
>+			reg = <0xfc4bc000 0x1000>;
>+			tsens_calib: calib at d0 {
>+				reg = <0xd0 0x18>;
>+			};
>+			tsens_backup: backup at 440 {
>+				reg = <0x440 0x10>;
>+			};
>+		};
>+
>+		tsens: thermal-sensor at fc4a8000 {
>+			compatible = "qcom,msm8974-tsens";
>+			reg = <0xfc4a8000 0x2000>;
>+			calib = <&tsens_calib>;
>+			calib_backup = <&tsens_backup>;
>+			qcom,tsens-slopes = <3200 3200 3200 3200 3200 3200
>+				3200 3200 3200 3200 3200>;
>+			#thermal-sensor-cells = <1>;
>+		};
>+
> 		timer at f9020000 {
> 			#address-cells = <1>;
> 			#size-cells = <1>;
>-- 
>QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>of Code Aurora Forum, hosted by The Linux Foundation
>