[RFC 4/7] thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
Rajendra Nayak
rnayak at codeaurora.org
Thu Apr 23 06:46:10 PDT 2015
8960 family of SoCs have the TSENS device as part of a domain
thats not always ON. Hence add .suspend and .resume hooks to
save and restore some of the inited register context.
8960 family has TSENS as part of GCC, hence reuse the GCC
regmap. Also 8960 family had some of the TSENS init sequence thats
required to be done by the HLOS driver (some later versions of TSENS
do not export these registers to non-secure world, and hence need
these initializations to be done by secure bootloaders)
8660 from the same family has just one sensor and hence some register
offset/layout differences which need special handling in the driver.
Based on the original code from Siddartha Mohanadoss, Stephen Boyd and
Narendran Rajan.
Signed-off-by: Rajendra Nayak <rnayak at codeaurora.org>
---
drivers/thermal/qcom/Makefile | 2 +-
drivers/thermal/qcom/tsens-8960.c | 336 ++++++++++++++++++++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 1 +
drivers/thermal/qcom/tsens.h | 2 +-
4 files changed, 339 insertions(+), 2 deletions(-)
create mode 100644 drivers/thermal/qcom/tsens-8960.c
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index a471100..f3cefd1 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o
+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
new file mode 100644
index 0000000..534b4ff
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -0,0 +1,336 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include "tsens.h"
+
+#define CAL_MDEGC 30000
+
+#define CONFIG_ADDR 0x3640
+#define CONFIG_ADDR_8660 0x3620
+/* CONFIG_ADDR bitmasks */
+#define CONFIG 0x9b
+#define CONFIG_MASK 0xf
+#define CONFIG_8660 1
+#define CONFIG_SHIFT_8660 28
+#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
+
+#define STATUS_CNTL_ADDR_8064 0x3660
+#define CNTL_ADDR 0x3620
+/* CNTL_ADDR bitmasks */
+#define EN BIT(0)
+#define SW_RST BIT(1)
+#define SENSOR0_EN BIT(3)
+#define SLP_CLK_ENA BIT(26)
+#define SLP_CLK_ENA_8660 BIT(24)
+#define MEASURE_PERIOD 1
+#define SENSOR0_SHIFT 3
+
+/* INT_STATUS_ADDR bitmasks */
+#define MIN_STATUS_MASK BIT(0)
+#define LOWER_STATUS_CLR BIT(1)
+#define UPPER_STATUS_CLR BIT(2)
+#define MAX_STATUS_MASK BIT(3)
+
+#define THRESHOLD_ADDR 0x3624
+/* THRESHOLD_ADDR bitmasks */
+#define THRESHOLD_MAX_LIMIT_SHIFT 24
+#define THRESHOLD_MIN_LIMIT_SHIFT 16
+#define THRESHOLD_UPPER_LIMIT_SHIFT 8
+#define THRESHOLD_LOWER_LIMIT_SHIFT 0
+
+/* Initial temperature threshold values */
+#define LOWER_LIMIT_TH 0x50
+#define UPPER_LIMIT_TH 0xdf
+#define MIN_LIMIT_TH 0x0
+#define MAX_LIMIT_TH 0xff
+
+#define S0_STATUS_ADDR 0x3628
+#define INT_STATUS_ADDR 0x363c
+#define TRDY_MASK BIT(7)
+
+static int suspend_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ unsigned int mask;
+ struct regmap *map = tmdev->map;
+
+ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->c.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, CNTL_ADDR, &tmdev->c.control);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1)
+ mask = SLP_CLK_ENA | EN;
+ else
+ mask = SLP_CLK_ENA_8660 | EN;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
+ if (ret)
+ return ret;
+
+ tmdev->trdy = false;
+
+ return 0;
+}
+
+static int resume_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ unsigned long reg_cntl;
+ struct regmap *map = tmdev->map;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_update_bits(tmdev->status_field,
+ MIN_STATUS_MASK | MAX_STATUS_MASK,
+ MIN_STATUS_MASK | MAX_STATUS_MASK);
+ if (ret)
+ return ret;
+
+ /*
+ * Separate CONFIG restore is not needed only for 8660 as
+ * config is part of CTRL Addr and its restored as such
+ */
+ if (tmdev->num_sensors > 1) {
+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->c.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, CNTL_ADDR, tmdev->c.control);
+ if (ret)
+ return ret;
+
+ reg_cntl = tmdev->c.control;
+ reg_cntl >>= SENSOR0_SHIFT;
+
+ return 0;
+}
+
+static int enable_8960(struct tsens_device *tmdev, int id)
+{
+ int ret;
+ u32 reg, mask;
+
+ ret = regmap_read(tmdev->map, CNTL_ADDR, ®);
+ if (ret)
+ return ret;
+
+ mask = BIT(id + SENSOR0_SHIFT);
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1)
+ reg |= mask | SLP_CLK_ENA | EN;
+ else
+ reg |= mask | SLP_CLK_ENA_8660 | EN;
+
+ tmdev->trdy = false;
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void disable_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ u32 reg_cntl;
+ u32 mask;
+
+ mask = GENMASK(tmdev->num_sensors - 1, 0);
+ mask <<= SENSOR0_SHIFT;
+ mask |= EN;
+
+ ret = regmap_read(tmdev->map, CNTL_ADDR, ®_cntl);
+ if (ret)
+ return;
+
+ reg_cntl &= ~mask;
+
+ if (tmdev->num_sensors > 1)
+ reg_cntl &= ~SLP_CLK_ENA;
+ else
+ reg_cntl &= ~SLP_CLK_ENA_8660;
+
+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+}
+
+static int init_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ u32 reg_cntl, reg_thr;
+ struct reg_field *field;
+ static struct reg_field status_0 = {
+ .reg = STATUS_CNTL_ADDR_8064,
+ .lsb = 0,
+ .msb = 3,
+ };
+ static struct reg_field status_8 = {
+ .reg = CNTL_ADDR,
+ .lsb = 8,
+ .msb = 11,
+ };
+ int i;
+
+ tmdev->map = dev_get_regmap(tmdev->dev->parent, NULL);
+ if (!tmdev->map)
+ return -ENODEV;
+
+ /* Status bits move when the sensor bits next to them overlap */
+ if (tmdev->num_sensors > 5)
+ field = &status_0;
+ else
+ field = &status_8;
+
+ tmdev->status_field = devm_regmap_field_alloc(tmdev->dev, tmdev->map,
+ *field);
+ if (IS_ERR(tmdev->status_field)) {
+ dev_err(tmdev->dev, "regmap alloc failed\n");
+ return PTR_ERR(tmdev->status_field);
+ }
+
+ /*
+ * The status registers for each sensor are discontiguous
+ * because some SoCs have 5 sensors while others have more
+ * but the control registers stay in the same place, i.e
+ * directly after the first 5 status registers.
+ */
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ if (i >= 5)
+ tmdev->sensor[i].status = S0_STATUS_ADDR + 40;
+ tmdev->sensor[i].status += i * 4;
+ }
+
+ reg_cntl = SW_RST;
+ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1) {
+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
+ reg_cntl &= ~SW_RST;
+ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
+ CONFIG_MASK, CONFIG);
+ } else {
+ reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
+ reg_cntl &= ~CONFIG_MASK_8660;
+ reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
+ }
+
+ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_update_bits(tmdev->status_field,
+ LOWER_STATUS_CLR | UPPER_STATUS_CLR |
+ MIN_STATUS_MASK | MAX_STATUS_MASK,
+ LOWER_STATUS_CLR | UPPER_STATUS_CLR |
+ MIN_STATUS_MASK | MAX_STATUS_MASK);
+
+ reg_cntl |= EN;
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ reg_thr = (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT) |
+ (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT) |
+ (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT) |
+ (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT);
+ ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int calibrate_8960(struct tsens_device *tmdev)
+{
+ int i;
+ char *data;
+
+ ssize_t num_read = tmdev->num_sensors;
+ struct tsens_sensor *s = tmdev->sensor;
+
+ data = qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(data))
+ data = qfprom_read(tmdev->dev, "calib_backup");
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ for (i = 0; i < num_read; i++, s++)
+ s->offset = CAL_MDEGC - s->slope * data[i];
+
+ return 0;
+}
+
+/* Temperature on y axis and ADC-code on x-axis */
+static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
+{
+ return adc_code * s->slope + s->offset;
+}
+
+static int get_temp_8960(struct tsens_device *tmdev, int id, long *temp)
+{
+ int ret;
+ u32 code, trdy;
+ const struct tsens_sensor *s = &tmdev->sensor[id];
+
+ if (!tmdev->trdy) {
+ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
+ if (ret)
+ return ret;
+ while (!(trdy & TRDY_MASK)) {
+ usleep_range(1000, 1100);
+ regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
+ }
+ tmdev->trdy = true;
+ }
+
+ ret = regmap_read(tmdev->map, s->status, &code);
+ if (ret)
+ return ret;
+
+ *temp = code_to_mdegC(code, s);
+
+ dev_dbg(tmdev->dev, "Sensor%d temp is: %ld", id, *temp);
+
+ return 0;
+}
+
+const struct tsens_ops ops_8960 = {
+ .init = init_8960,
+ .calibrate = calibrate_8960,
+ .get_temp = get_temp_8960,
+ .enable = enable_8960,
+ .disable = disable_8960,
+ .suspend = suspend_8960,
+ .resume = resume_8960,
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index aeb32a1..fa50588 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -71,6 +71,7 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
static const struct of_device_id tsens_table[] = {
{
.compatible = "qcom,msm8960-tsens",
+ .data = &ops_8960,
}, {
.compatible = "qcom,msm8916-tsens",
.data = &ops_8916,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index ee4ae14..a1d6f7a 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -64,6 +64,6 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
int init_common(struct tsens_device *);
int get_temp_common(struct tsens_device *, int, long *);
-extern const struct tsens_ops ops_8916, ops_8974;
+extern const struct tsens_ops ops_8960, ops_8916, ops_8974;
#endif /* __QCOM_TSENS_H__ */
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
More information about the linux-arm-kernel
mailing list