[PATCH v2 2/5] mmc: mediatek: Add Mediatek MMC driver

Sascha Hauer s.hauer at pengutronix.de
Fri Apr 17 06:45:47 PDT 2015


Hi Chaotian,

On Tue, Mar 17, 2015 at 11:13:52AM +0800, Chaotian Jing wrote:
> Add Mediatek MMC driver code
> 

[...]

> +	host->dev = &pdev->dev;
> +	host->mmc = mmc;
> +	/* Set host parameters to mmc */
> +	mmc->ops = &mt_msdc_ops;
> +	mmc->f_min = 260000;
> +	mmc->ocr_avail = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33;
> +
> +	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> +	/* MMC core transfer sizes tunable parameters */
> +	mmc->max_segs = MAX_BD_NUM;
> +	mmc->max_seg_size = 64 * 1024;

Earlier versions of this driver had 64 * 1024 - 512 here. Using 64k
breaks SD card support here. Reading the partition table still works
fine, but the next transfers fail with messages like:

mtk-msdc 11240000.mmc: msdc_request_timeout: aborting cmd/data/mrq
mtk-msdc 11240000.mmc: msdc_request_timeout: aborting mrq=ffffffc06e586860 cmd=18
mtk-msdc 11240000.mmc: msdc_request_timeout: abort data: cmd18; 136 blocks
mmcblk1: error -110 transferring data, sector 338488, nr 136, cmd response 0x900, card status 0xb00
mtk-msdc 11240000.mmc: set mclk to 0 mmc1: tried to reset card

Can you confirm this?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list