[PATCH 13/13] ARM: ux500: add CoreSight blocks to DTS file

[Linus Walleij]

This registers all the CoreSight blocks on the DB8500 SoC:
each core has a PTM (v1.0, r1p0-00rel0) connected, both connected
to a funnel (DK-TM908-r0p1-00rel0) which in turn connects to a
replicator (DM-TM909-r0p1-00rel0). The replicator has two outputs,
port 0 to a TPIU interface and port 1 to an ETB
(DK-TM907-r0p3-00rel0). The CoreSight blocks are all clocked by
the APEATCLK from the PRCMU and their AHB interconnect is clocked
from a separate clock called APETRACECLK.

The SoC also has a CTI/CTM block which can be added later as we
have upstream support in the CoreSight subsystem.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
Mathieu: this patch will go into the ux500 tree if you think
it looks OK. Just provide your ACK if you think it's looking
good and I'll take care of it. The rest of the CoreSight stuff
should be funneled through your tree I guess.
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi | 129 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 129 insertions(+)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index bd6bd0926931..2f6ed08db9fe 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -48,6 +48,135 @@
 			};
 		};
 
+		ptm at 801ae000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801ae000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU0>;
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+
+		ptm at 801af000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801af000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU1>;
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+
+		funnel at 801a6000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x801a6000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel output ports */
+				port at 0 {
+					reg = <0>;
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+
+				/* funnel input ports */
+				port at 1 {
+					reg = <0>;
+					funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port at 2 {
+					reg = <1>;
+					funnel_in_port1: endpoint {
+						slave-mode;
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-replicator";
+			clocks = <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* replicator output ports */
+				port at 0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
+				};
+				port at 1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etb_in_port>;
+					};
+				};
+
+				/* replicator input port */
+				port at 2 {
+					reg = <0>;
+					replicator_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		tpiu at 80190000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x80190000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+
+		etb at 801a4000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x801a4000 0x1000>;
+
+			coresight-default-sink;
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			port {
+				etb_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
 		intc: interrupt-controller at a0411000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-- 
1.9.3