[PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini

[Boris Brezillon]

On Mon, 13 Apr 2015 14:56:12 +0200
Gaël PORTAY <g.portay at overkiz.com> wrote:

> Hi,
> 
> Here are two patches to bring support for a new hardware based on SAM9G25 SoC.
> 
> The first one adds the PIN controller definition for PWM0.
> The second defines the new board.

To the whole series,

Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>

> 
> Changes since v1:
> - drop useless comments
> - move pwm0 pinctrl's node close to tcb0
> - drop ek boards from compatible machine
> - add at91sam9g25 board to compatible machine
> 
> Changes since v2:
> - update to v4.0
> - fix alphabetical order between gpio_keys and pwm_leds
> 
> Best regards,
> Gaël PORTAY (2):
>   ARM: at91/dt: sam9x5: add pinctrl for pwm0
>   ARM: at91/dt: add support for kizboxmini
> 
>  arch/arm/boot/dts/Makefile            |   1 +
>  arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/at91sam9x5.dtsi     |  46 ++++++++++++
>  3 files changed, 176 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
> 



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com