AM335x OMAP2 common clock external fixed-clock registration

[Tero Kristo]

On 04/15/2015 05:09 PM, Michael Welling wrote:
> On Wed, Apr 15, 2015 at 09:34:48AM +0300, Tero Kristo wrote:
>> On 04/15/2015 12:17 AM, Michael Welling wrote:
>>> Greetings,
>>>
>>> I have developed an AM3354 based SoM and it uses an external SI5351 clock
>>> generator to drive the clock inputs for an external duart and I2S audio
>>> master clock. With the registration according to the documentation the
>>> reference clock is not being detected and hence the clock generator is
>>> not working as expect.
>>>
>>> After trying many different things, I started to look around the mailing
>>> lists to find information related to this issue.
>>>
>>> I came acrossed post that has the exact same issue:
>>> https://lkml.org/lkml/2013/2/18/468
>>>
>>> Seeing as the patch did not land upstream, I am wondering if there is
>>> a solution that I am not seeing.
>>>
>>> I am willing to provide a patch given appropriate guidance.
>>
>> Hi Michael,
>>
>> The info on the email you referenced is kind of obsolete, TI SoCs
>> are calling of_clk_init() during boot now, and thus external clock
>> nodes should be registered fine also. Maybe you can provide the
>> actual DTS patch you are trying out so we can help better...? Are
>
> See attached patch and console output.

I see a bug in your dt data.

<snip>

+	clocks {
+		ref27: ref27 {
+			#clock-cells = <0>;
+			compatibale = "fixed-clock";

This should be compatible, right? DT is annoying in that it doesn't 
verify property names.

+			clock-frequency = <27000000>;
+		};
+	};

-Tero

>
>> you seeing any boot time error / warning prints for your new clock?
>
> With the debug messages on you see that the reference clock is not being
> detected.
>
> Whilest debugging I found that the of_clk_get is returning an error no matter
> which clock I pass it:
> http://lxr.free-electrons.com/source/drivers/clk/clk-si5351.c#L1131
>
>>
>> -Tero