[PATCH v8 10/18] clk: tegra: Initialize PLL_X before CCLK_G to ensure it has a parent
Mikko Perttunen
mikko.perttunen at kapsi.fi
Sat Apr 11 04:00:24 PDT 2015
On 04/11/2015 12:08 AM, Michael Turquette wrote:
> Quoting Mikko Perttunen (2015-03-01 04:44:33)
>> This patch moves the initialization of PLL_X to be slightly before
>> that of CCLK_G. This ensures that at boot, CCLK_G will immediately
>> have a parent and the common clock framework can determine its
>> clock rate correctly.
>>
>> Without this patch, calling clk_put on CCLK_G could cause the CCF
>> to set its rate to zero, hanging the system.
>
> Hi Mikko,
>
> Patch looks fine to me but I wanted to get more info on the behavior you
> mentioned above about clk_put. Is there some special circumstance that
> causes this for you? Why does calling clk_put adjust the rate of your
> clock?
>
> Thanks,
> Mike
Hi Mike,
this is the chain of events:
- CCLK_G is registered. CCF stores its current rate, but since it
doesn't have a parent at this point, the rate is assumed zero.
- tegra cpufreq driver tries to probe, and clk_gets CCLK_G
- tegra dfll driver tries to probe, but fails
- tegra cpufreq driver's probe fails, and during unwinding clk_puts CCLK_G
- CCF attempts to restore CCLK_G's rate to what it was prior to the
clk_get (to revert possible changes due to clock constraints)
- the stored rate was zero, so CCLK_G is set to zero.
We did discuss it a bit on IRC with Tomeu and Peter and agreed that some
fix in CCF should be done, but we didn't get much further than that.
Mikko
>
>>
>> Signed-off-by: Mikko Perttunen <mikko.perttunen at kapsi.fi>
>> ---
>> v8:
>> - Added
>>
>> drivers/clk/tegra/clk-tegra-super-gen4.c | 46 ++++++++++++++++++--------------
>> 1 file changed, 26 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/clk/tegra/clk-tegra-super-gen4.c b/drivers/clk/tegra/clk-tegra-super-gen4.c
>> index f1f4410..c5ea9ee 100644
>> --- a/drivers/clk/tegra/clk-tegra-super-gen4.c
>> +++ b/drivers/clk/tegra/clk-tegra-super-gen4.c
>> @@ -104,6 +104,32 @@ void __init tegra_super_clk_gen4_init(void __iomem *clk_base,
>> struct clk *clk;
>> struct clk **dt_clk;
>>
>> + /*
>> + * Register PLL_X first so that CCLK_G has a parent at registration
>> + * time. This ensures that the common clock framework knows CCLK_G's
>> + * rate.
>> + */
>> +
>> +#if defined(CONFIG_ARCH_TEGRA_114_SOC) || defined(CONFIG_ARCH_TEGRA_124_SOC)
>> + /* PLLX */
>> + dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x, tegra_clks);
>> + if (!dt_clk)
>> + return;
>> +
>> + clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
>> + pmc_base, CLK_IGNORE_UNUSED, params, NULL);
>> + *dt_clk = clk;
>> +
>> + /* PLLX_OUT0 */
>> +
>> + dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x_out0, tegra_clks);
>> + if (!dt_clk)
>> + return;
>> + clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
>> + CLK_SET_RATE_PARENT, 1, 2);
>> + *dt_clk = clk;
>> +#endif
>> +
>> /* CCLKG */
>> dt_clk = tegra_lookup_dt_id(tegra_clk_cclk_g, tegra_clks);
>> if (dt_clk) {
>> @@ -127,25 +153,5 @@ void __init tegra_super_clk_gen4_init(void __iomem *clk_base,
>> }
>>
>> tegra_sclk_init(clk_base, tegra_clks);
>> -
>> -#if defined(CONFIG_ARCH_TEGRA_114_SOC) || defined(CONFIG_ARCH_TEGRA_124_SOC)
>> - /* PLLX */
>> - dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x, tegra_clks);
>> - if (!dt_clk)
>> - return;
>> -
>> - clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
>> - pmc_base, CLK_IGNORE_UNUSED, params, NULL);
>> - *dt_clk = clk;
>> -
>> - /* PLLX_OUT0 */
>> -
>> - dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x_out0, tegra_clks);
>> - if (!dt_clk)
>> - return;
>> - clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
>> - CLK_SET_RATE_PARENT, 1, 2);
>> - *dt_clk = clk;
>> -#endif
>> }
>>
>> --
>> 2.3.0
>>
More information about the linux-arm-kernel
mailing list